IPL shr,opt,nd yag laser,808,co2 laser,elight ipl, buy Professional high power 3000w super hair removal OPT machine on China Suppliers Mobile

Product Details

Product name:Professional high power 3000w super hair removal OPT machine

Advantage

OPT machine

1. SHR machine is with single pulse mode can emit energy averagely.

2. SHR filtered violet light and infrared light,which will eradiate and absore water from target skin.So SHR does not have any side-effect to body.

3. Identified function makes operation simple, makes treatment safely!

4. With bigger frequency(from 1 to 10 Hz),which accelerate operation speed and short a lot of time for treatment.

5. With stationary technology &In-motion technology. Moving IPL can use less time to do treatment on back, leg and arm.

Applications

Applications of OPT machine

1.Hair Removal
Remove unwanted hair from any part of the body.

2.Skin Rejuvenation
Removal or reduction of age spots, visible blood vessels, diffuse redness and uneven pigmentation while improving skin texture.

3.Thread Vein Removal
Removal or reduction of facila thread viens.
4.Acne Clearance
Reduction of inflammatory acne when used in combination with a topical cream or gel.

5.Vascular Lesions
Removal or reduction of port wine stains, thread veins and other vascular lesions.

6.Pigmented Lesions
Removal or reduction of freckles, age spots and other pigmented lesions.

Technical Parameter

Technical parameter of OPT machine

Wavelength	430nm/530nm/560nm/590nm/640nm-1200nm
Handpiece number	2 piece with 5 filters
Spot size	1230(mm) &1550(mm)
Cooling system	semiconductor+air+water+cooling gel
IPL light energy	1-50(j/cm²)
Pulse duration	1-10ms
Pulse NO.	1-6
SHR pulse duration	1-7ms
SHR frequency	1-10HZ
SHR energy	1-50J/CM2
Skin cooling	-4°c-10°c
Display	10.4″color touch screen
Output power	2500W
Voltage	110v,50hz or 220v,60hz
Machine Size	(LWH):42cm38cm90cm
Net weight	60kg
Gross weight	91kg
Package size	69cm64cm102cm

Wavelength Functions

Wavelength	Treatment of OPT machine
430-1200nm	Acne removal
480-1200nm	Age spots, sun spots & pigmentation removal, skin rejuvenation
530-1200nm	Freckles removal, Skin rejuvenation
560-1200nm	Whitening skin, Skin rejuvenation
580-1200nm	Vascular removal, fade melasma, skin rejuvenation
640-1200nm	Thick Hair removal
690-1200nm	Soft Hair removal

How to use

Hair removal of OPT machine

1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.

2. Clear treatment area.

3. Turn on machine,

1). Use SHR, adjust pulse width at 7ms, frequency 5HZ, energy 10J/cm2.

2). Use normal hair removal treatment, put the 640nm or 690nm filter into the slot, select

"hair removal",adjust the parameter, set it to ‘ready’ .

4. Put cooling gel on treatment area about 2mm.

5. Wear protect goggles for patient and operator.

6. Shot the treatment area, let the crystal tip to touch cooling gel, You are permitted to have

1/3 overlapping on treatment area.

7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area until heat disappear.

Skin rejuvenation

1. Clear treatment area.

2. Turn on machine ,put the 560nm filter into the slot, select "skin rejuvenation",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Pigmentation Therapy

1. Clear treatment area.

2. Turn on machine ,put the 480nm or 530nm filter into the slot, select "pigmentation

therapy",adjust the parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Vascular Therapy

1. Clear treatment area.

2. Turn on machine ,put the 580nm filter into the slot, select "vascular therapy",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Acne Therapy

1. Clear treatment area.

2. Turn on machine ,put the 430nm filter into the slot, select "acne therapy",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Wrinkle removal

1. Clear treatment area.

2. Turn on machine ,put the 580nm filter into the slot, select "wrinkle removal",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

360° show

Handpieces