Product Details

Principle:

E-light:
Through light pyrolysis principle, using intense pulsed light can act directly on the skin, make skin lesions on the solar energy selective absorption to the treatment of a variety of tissues, and do not damage normal skin tissue.
RF:
RF through the skin directly in the dermis, activation of dermal cells allow water molecules are high-speed vibration friction energy, when the local to about 60 °C (subcutaneous gusts of warm sense) dermal collagen immediately convergence and activation of long term growth so as to improve the convergence of the skin and anti-aging effect of living color.

Classical Modern Hair Removal Machine/ ipl shr/ shr ipl high power portable shr ipl machine

Advantage

permanent hair removal shr ipl machine:

1. SHR machine is with single pulse mode can emit energy averagely.

2. SHR filtered violet light and infrared light,which will eradiate and absore water from target skin.So SHR does not have any side-effect to body.

3. Identified function makes operation simple, makes treatment safely!

4. With bigger frequency(from 1 to 10 Hz),which accelerate operation speed and short a lot of time for treatment.

5. With stationary technology &In-motion technology. Moving IPL can use less time to do treatment on back, leg and arm.

Applications

Applications of permanent ipl opt:

1.Hair Removal
Remove unwanted hair from any part of the body.

2.Skin Rejuvenation
Removal or reduction of age spots, visible blood vessels, diffuse redness and uneven pigmentation while improving skin texture.

3.Thread Vein Removal
Removal or reduction of facila thread viens.
4.Acne Clearance
Reduction of inflammatory acne when used in combination with a topical cream or gel.

5.Vascular Lesions
Removal or reduction of port wine stains, thread veins and other vascular lesions.

6.Pigmented Lesions
Removal or reduction of freckles, age spots and other pigmented lesions.

Technical Parameter

Technical parameter of shr ipl machine

Wavelength	430nm/530nm/560nm/590nm/640nm-1200nm
Handpiece number	2 piece,one shr handpiece,one sr handpiece
Cooling system	semiconductor+air+water+cooling gel
IPL light energy	1-50(j/cm²)
Pulse duration	1-10ms
Pulse NO.	1-6
SHR pulse duration	1-7ms
SHR frequency	1-10HZ
SHR energy	1-50J/CM2
Skin cooling	-4°c-10°c
Display	10.4″color touch screen
Output power	2000W
Voltage	110v,50hz or 220v,60hz

Wavelength Functions

Wavelength	Treatment of shr ipl machine
430-1200nm	Acne removal
480-1200nm	Age spots, sun spots & pigmentation removal, skin rejuvenation
530-1200nm IPL applications 1. Hair removal: Remove unwanted hair in different depths and thickness; 2. Skin rejuvenation, contract the pores and remove black heads; 3. Effectively remove all kinds of pigment, such as a freckle, deep-seated speckle, cuticular speckle, corium speckle, age pigment and chloasma; 4. Remove facial vascular lesions (Telangiectasis or pathological capillary vessel); 5. Remove acne on face and body effectively; 6. Dispel wrinkle, tighten skin, and lift face;	Freckles removal, Skin rejuvenation
560-1200nm	Whitening skin, Skin rejuvenation
580-1200nm	Vascular removal, fade melasma, skin rejuvenation
640-1200nm	Thick Hair removal
690-1200nm	Soft Hair removal

How to use

Hair removal of ipl opt:

1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.

2. Clear treatment area.

3. Turn on machine,

1). Use SHR, adjust pulse width at 7ms, frequency 5HZ, energy 10J/cm2.

2). Use normal hair removal treatment, put the 640nm or 690nm filter into the slot, select

"hair removal",adjust the parameter, set it to ‘ready’ .

4. Put cooling gel on treatment area about 2mm.

5. Wear protect goggles for patient and operator.

6. Shot the treatment area, let the crystal tip to touch cooling gel, You are permitted to have

1/3 overlapping on treatment area.

7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area until heat disappear.

Skin rejuvenation

How it works

IPL (Intense Pulsed Light) is a kind of light with high energy and broad wavelength, within the range

from 420nm to 1200nm. Intense Pulsed Light with broad spectrum affects pigmentations, vascular

lesions and hair follicles. Photochemical and photochemical action will be triggered by the radiation of IPL.

Pigment is shattered and eliminated out of body through metabolism. Meanwhile, IPL will also promote collagen production, which can make the skin more flexible and smooth. The light with long wavelength can easily pass through epidermis layer to the hair follicles in the deep skin layer. At the targeted area,high energy occurs to destroy follicles and hair shaft, preventing regrowth of new hair. With a series of treatment, IPL technology can help restore a more youthful appearance without downtime and side effect.

1. Clear treatment area.

2. Turn on machine ,put the 560nm filter into the slot, select "skin rejuvenation",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Pigmentation Therapy

1. Clear treatment area.

2. Turn on machine ,put the 480nm or 530nm filter into the slot, select "pigmentation

therapy",adjust the parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Vascular Therapy

1. Clear treatment area.

2. Turn on machine ,put the 580nm filter into the slot, select "vascular therapy",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Acne Therapy

1. Clear treatment area.

2. Turn on machine ,put the 430nm filter into the slot, select "acne therapy",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Wrinkle removal

1. Clear treatment area.

2. Turn on machine ,put the 580nm filter into the slot, select "wrinkle removal",adjust the

parameter, set it to ‘ready’ .

3. Put cooling gel on treatment area about 2mm, you are suggested to put cooling gel in

refrigerator to keep temperature of gel during 0-4°C.

4. Wear goggles for patient and operator

5. Shot the treatment area, let the crystal tip to touch cooling gel. You are permitted to have

1/3 overlapping on treatment area.

6. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients

feel warm or hot, you may put ice bag on treatment area for 30 minutes until heat-feeling

disappears.

Pictures show

What is IPL Skin Rejuvenation?
IPL is a kind of photon therapeutic apparatus, also called IPL photo rejuvenation. It is widely used for skin rejuvenation, hair removal and pigmentation removal with the therapeutic mechanism of thermal selective effect. It is a kind of non-abrasive photodynamic therapy, making use of insignificant amount of intense pulsed light technology to conduct non-abrasive skin rejuvenation therapy with low energy and density, to achieve the purpose of rejuvenating and beautifying the skin.