Application

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

1. Remove acne, acne scar, scar and so on;

2. Dispel wrinkle around the eyes, crow's-feet, and wrinkle formed by lack of water;

3. Effectively reduce the wrinkle on the face, forehead, the joints and striae gravidarum;

4. Dispel freckle, nevus zygomaticus and other spots formed by hyperchromic pathological changes;

5. Tighten skin and lift face;

6. Remove striae gravidarum and other deep scars.

Special Features

1. Super large color touch LCD, more sensitive, more comfortable and accurate operating

2. 6 joint arms, more convenient operating ,less costs

3. Output patterns are more than 7.The requirements of different patients can be satisfied.

4. Fractional and super-pulse can be switched at random. There is a wider use in clinical application.

5. Focal spot diameter and interval are adjustable. Patient’s unique needs can be met during treatment.

6. CPU imported from America can work stably and has excellent performance.

7. There are 3 mode CPG, 10W, 20W, 30W, which can be installed according to different needs .

Technical Parameter

Electrical Requirements

AC 220V±10%

50Hz

Beam Delivery

6 joint arm

Wavelength

10600nm

Cooling

Air cooling

Aiming wavelength

635nm

Output mode

Continuous, super pulse, fractional

Focal Spot Diameter

0.25mm

Operating mode

Continuous, operation with, intermittent loading

Power of Aiming Beam

≤5mw

Whether Preview or not

Yes

Pulse Interval

1ms-5000ms, every stepping 1ms

Times of scanning

1th-20^th

Pulse Width

0.1ms-10ms ,every stepping 0.1ms

Scanning Mode

Disorder emitting, to one side as the base emitting in order, emitting by maximum distance

Output Power

1%-100%(adjustable), every stepping1%,15W,25W,35W(optional)

Output Pattern

Beeline, triangle, right square, rectangle, hexagon, rotundity, ellipse and so on

Spots Interval

0.1mm-2.6mm,every stepping 0.1mm

Pattern Size

Diagonal length from 0.1mm to 20mm is adjustable at random