Companies looking for Distributor !!!Fractional RF Microneedle Machine for Wrinkle Removal and Skin Tighten
USD $1 - $2 /Piece
Min.Order:1 Piece
Guangzhou Realtop Beauty Equipment Co., Ltd.
Fractional RF Microneedle Machine for Wrinkle Removal and Skin Tighten
MR16 is minimal invasive fractional RF with special design of many fine Needle point array . It provides direct heat both epidermis and dermis with precise depth control from 0.25mm to 3mm.
Its efficient fractional radiofrequency enable capability of achieving fractional and continuous treatment patterns.
Its expends your practice by offering efficacious minimal risk of down time and pain regardless of skin type.
Functions : ( Fractional Needle RF )
1.Improve the pore, scar, deep wrinkles, acne, pigmentation, 2.It increases skin collagen elasticity, improves wrinkles. 3.Smoothen skin, tighten pores. 4.With least pain, and provide accurate energy.5.Minimally invasive to skin 6.RF direct penetration to the target area, in order to obtain sufficient effect.7.Scar removal - including reduce acne scars 8.Suitable for stretch marks, anti aging, anti-wrinkle therapy, hair restoration, excessive pigmentation treatment
The Disposable Tips ( Fractional Needle RF )
Technical Features
Easy to control the needle into the depth, agile adjustable
Superficial fractional RF and microneedle fractional RF hand stick hand bar
The allocation of 25 pin, 49 pin and 81 pin replaceable type RF needle head
The allocation of replaceable type RF point array work head
RF energy fine adjustable
MRF+SRF+PDT+CRYO
The mature stable eight inches of true color liquid crystal display output and input system
Configuration sellers market plan management system
Parameters ( Fractional Needle RF )
| |
Needle Depth | 0.25mm-3mm |
RF Conduct Time | 0.1s-0.2s (0.1s unit) |
RF Output | 1w-50w (1w unit) |
RF E.FIELD WIDTH (at 1mm Depth) | 62mm2 The disposable tip |
RF Frequency | Bipolar, 2MHz |
Electrode No. | 36pin |
Work mode | CW Mode, Pulse mode |
Spot size | 1cm2 |
Working program | 3 max program |
Treatment Procedure :( Fractional Needle RF )
1. Apply the anesthesia cream
2. Clean the target area
3. Start the treatment as the sequence of the followings:
--- Forehead
--- Around eyes
--- Nose
--- Under eyes
--- cheek
--- Around lips
--- Chin and under chin
--- Jaw lines
4. Apply anti-infection cream on the treated area after the treatment if necessary.
Collagen mask could be used after the treatment to increase the result.
5. Sun proof lotion and umbrella is necessary if under the sunshine after the treatment.
Advantages: ( Fractional Needle RF )
Dedicate control of treatment depth ---0.25mm-3mm
Control of pulse time by 0.1 second
Control of Pulse power by 1W
Use 36 micro needles as electrodes to reduce the pain during the treatment
Direct delivery of RF energy on the target Area
Continuous heating with non-insulated micro electrodes
Fractional rf Specification:
System | Fractional RF & PDT |
Adjustable Low-speed Handle | 1 pcs |
Non-adjustable Low-speed Handle | 1 pcs |
MRF micro needles head | 25needles |
MRF micro needles head | 49needles |
MRF micro needles head | 81needles |
SRF electro head | 2 pcs |
Working Heads Option 1
Superficial Fractional RF newestgic (name: SRF)
1)High speed RF
2)Low gear RF
Working Heads Option 2
Microneedle Fractional RF theramgic (name: MRF)
1)High speed RF
2)Low gear RF
Parameters facial machine
Rated Voltage | AC200V/50Hz, AC110V/60Hz | |||
Display | 10.4" Color TFT LCD Panel with CCFL Back Light (800*600) | |||
Input power | lower than 80W | |||
Output frequency | 1.6MHz | |||
Output wavelength | PDT 650nm | |||
Mechanical
| Dimension | 480mm x 295mm x 1060mm [WxDxH] | ||
Weight | About 30kg | |||
Fractional RF MicroNeedle Type | SRF (Superficial Fractional RF) | High speed SRF | No pin | |
| Low gear SRF | No pin | ||
MRF (Microneedle Fractional RF)
| High speed MRF | 81pin | ||
49pin | ||||
25pin | ||||
Low gear MRF | 81pin | |||
49pin | ||||
25pin | ||||
Transport and storage
| Ambient temperature range | -40°C~+55°C | ||
Relative humidity range | lower 93% | |||
Atmostheric pressurer range | 50KPa-106KPa |
Free training: for operation of the machine in our company, which provided by our specialized training department.
On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser machine, and after-sale maintenance and more.
OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty machine.
Quality guarantee:One year
Our after-sales Service:
1.1 year warranty with professional support
2.Within 1 year, Supply spare parts for free if the machine has quality problem
Dear,if you have any question ,welcome to contact us !!