Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Fractional CO2 laser beauty equipment
BL-F02
Principle:
Fractional photo thermolysis creates an array of microscopic thermal wounds,
called microscopic treatment zones, at specific depths. Unlike other ablative and
nonablative lasers, which produce layers of thermal heating, the FP creates
microscopic columns of thermal damage, sparing surrounding tissues and promoting
more rapid healing. The FP treatment results which are collagen remodeling and
skin turnover are excellent. Removing lentigines and other discolorations and
producing fresher, tighter, and more youthful skin could be little to no downtime.
Applications:
1. Reduce lines and deep wrinkles on the face
2. Tighten skin on the face and neck
3. Improve skin tone around eyelids, jowls and neck
4. Rejuvenate sun-damaged skin and improve texture
5. Remove pigmented lesions
6. Improve tone and texture on the chest, arms, and hands
7. Change the appearance of scars.
Specification:
Wavelength: | 10600nm |
Laser apparatus: | Sealed off laser simulated by direct current |
Optical beam quality: | TEM00 |
Output power: | 30w |
Spot size: | 0.02~0.05mm2 |
Aiming beam: | Red semiconductor laser 635nm, less than 5mw |
Beam transport: | Articulated arm with 7-joint and balance weight |
Working mode: | Continuous operation |
Output Mode: | single pulse, interval pulse and super pulse |
Scan scope: | Max 20mmx20mm |
Scan graphics: | Circle, triangle, square, rectangle,hexagon |
Scanning Mode: | Random , Normal and Midsplit scan |
Scanning speed: | More than 10m/s |
Energy: | CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
1- 30W |
Pulse width | 0.1-5.0ms |
Distance: | 0.1-2.6mm |
Input power: | 450VA |
Cooling system: | Water and air circulation | Theory - co2 fractional laser
CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis . It is the most beneficial skin recovery system and can achieve the long-term effect of collagen remodeling as well as improvement of aged skin conditions due to exposure to light. It can be very safely applied to various types of scars compared to the existing 100% total layer skin peeling lasers (CO2 or Er: YAG). In addition, it does not require a long period of recovery or side effects. It can remodel various types of deformed scars and skin tissue very effectively.
Temperature: | 5°C~40°C |
Relative humidity: | Less than 80% |
Power: | 110V/220V |
Payment and Delivery:
Payment terms:
-Sample Charge: T/T or Western Union
Packing and shipping:
-Standard Export Carton with fully Polyfoam or Pearl Wool
-Delivery within 5 to 10 working days upon receiving payment
After-Sales-Service:
-Lifetime with professional engineer support.
-Within 1 year, supply spare parts for free if the machine has quality problem.
Delivery time 3-5 wokdays after receiving money:
Contact Information:Beautylife Electronic Technology Co.,Ltd
Any request,pls feel free to contact me
Contact: kris
Skype: kris126
Wechat: zhaolubao113
Whatsapp: +8618713988515
Website:
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc