Product Details

Operation Process of Lipo Laser for weight loss:

1) Check the thickness of the fat

2) Clean treatment area; Clear the hair of the treatment area

3) Mark the size of treatment area

4) The lip laser treatment, using the Belt to fixed the pads on the treatment parts of body. Wear glasses goggles.

Fat Cavitation and RF Equipment Ultrasonic Cavitation Radio Frequency

Machine Cavitation Vacuum Tripolar RF Skin Care Slimming Machine

Theory:

With collective strong sound wave head , strong sound wave of 40000HZ may be emitted to vibrate fat cells

at top speed and produce numerous vacuum air pockets inside and outside the fat cells , robustly impact fat

cells to generate introverted blast and disintegrate triglyceride into glycerol and free fatty acids.Then the RF

waves at the frequency of 1M HZ is used for exhausting the integrated glycerol and free fatty acids through

hepatoenteral circulation.Finally, vacuum RF and energy electrode are used for positioning and tightening fat.

In physics,it is known as "cavitation".Micropore introverted blast insideand outside cell may lead to enhanced

molecular motion and a higher energy level and this will finally cause fat cell rupture and thereby achieve the

effects of body building and losing weight.

Features:

1. The entire process is completed without the need of surgery and anesthesia.

2. Does not cause the phenomenon of uneven skin.
3. Does not cause the phenomenon of bleeding, swelling and blood stasis.
4. Without side effects and the risk of gaining the weight back, the results are rather obvious.
5. Non-invasive treatment does not affect the normal work and life.

Functions:

Firm the arms, legs, thighs, buttocks, waist, back, abdominal muscles and reshape the body figure

*Improve and treat the orange peel like fatty tissues of different serious levels
*With the effects of soothing, decompression and pain relief (such as joint pain, sciatica),promote the regular mechanical aerobic exercise of skin tissue, rapidly relieve stress and remove fatigue.

*Firm, lift and compact the skin and mould the face shape
*Circulate and activate cellspromote metabolisand so that 100% more collagen and elastic fibers may be gained for improving the facial and body skin

Package Including:

Multipolar RF head(Tripolar RF) X 1

40KHz Cavitation Head X 1
Vacuum Biploar Head x 1
Bipolar RF Head for face X 2
Power cord x 1

Operation procedures:

*Negative pressure RF head

Press "TIME SET" to adjust the time, adjust the operating rod "RF CHANNE" to "FACE" (i.e.start facial RF headtreatment),adjust operating rod "RF CHANNE" to "BODY" (i.e. start body vacuum RF head treatment) , press

"PAUSE THERE ELECTRODE RF" to start RF operation , press "RF ENERGY" and then "+" to increase the RF

intensity or "-" to decrease RF intensity, press "AIR PUMP PAUSE" to start the operation of negative pressurevacuum RF head. Apply gel to the negative pressure vacuum RF head, point it to the position for losing weight and operate in pulling technique (drag fat at the position for losing weight to the position where it is closer to the lymph gland) for about 20 minutes.

Notes:
1. Spread gel or essence on the treated positions for hairdressing evenly
2. In use, start with low-energy. We suggest to try for the proper energy level on the back of clients' hands before using on body of them

3. Do not use essential oil as the medium
4. In operation, start pulling only after negative pressure head is attached to skin.
5. Turn off the instrument probe when it is not in use.

*Strong sound wave explosion fat head

Press "TIME SET" to adjust the time , select the strength of "LOW" , "MIDDLE" or "HIGH" by clicking "-" to decrease the strength or click "+" to increase it . Press "PAUSE" to start the strong sound wave explosion fat head

Mode a.b.c.d means that:
"A" is continuous working for 3 sec and discontinuous for 2 sec.
"B" is continuous working for 4 sec and discontinuous for 3sec.
"C" is continuous working for 1 sec and discontinuous for 1 sec.
"D" is continuous working for 0.5 sec and discontinuous for 0.5sec.

*Body RF Probe(Vacuum)

Panel: Press "RF CHANNEL" in the display screen to select body RF output, select the

suitable intensity (adjust according to the customer's acceptable level, 36 is ok.),and at last press PAUSE key.

The face RF starts to work.
Beautifying: Use the probe to massage the specific part of skin circularly after applying th e sliming cream for about 30 to 40 minutes. It could quicken the blood circulation in the part of skin treated and has the effect of decomposing fat, etc.

Matters needing attention:

1. Apply sliming cream or cooling gel to the part of skin to be treated before the treatment.

2. Keep close contact between the probe and the skin.
3. Adjust the intensity from low level to high level.
4. Please do not irradiate eyeball directly with colored light.

*Facial RF head

Press "TIME SET" to adjust the time, adjust the operating rod "RF CHANNE" to "FACE" and press "PAUSE THERE

ELECTRODE RF"to start RF operation; press "RF ENERGY" and then "+" to increase the RF intensityto decrease RF intensity. Adjust to a proper level (according to acceptability of clients.Generally speaking,levels 3– 6

are OK).Spread gel orwrinkle smoothing essence onthe treated positions for hairdressing (generally 20-30G each time), operate with the facial RF head for 15-20 minutes with mainly the spiral movement on face.

Operation Guides:

THIGH

Treated time: 30 minutes
1.From down to upper, pushing to the groin to dredge the lymph.

RF technology rapidly changes electric field polarity which alternately attracts and repels electrons
and charged ions in the dermis and subcutaneous tissue.The tissue’s natural resistance (impedance) to this movement
produces heat and the thermal effect on the dermis leads to collagen stimulation and activation of fibroblast cells.
Collagen contraction and tissue tightening are followed by new collagen production over time. As no current flows through the epidermis,
the skin surface is not exposed to heat and no superficial cooling is required.
RF can be offered for the improvement of skin laxity, wrinkles and facial contours.

2.From down to upper, circling push by anticlockwise, can help decomposing fatness.

Main Applications:

(1) Smooth fine wrinkles, shrink pores.

(2) Make the skin moist.

(3) Enhance lymphatic and blood circulation.

(4) Get rid of facial redness.

(5) Eliminate slow acne scars.

(6) Promote collagen and cell activation.

(7) Improve skin activity and toughness.

(8) Increase the speed of metabolism, speed up the body to excrete waste and excessive water.

(9) Reduce stretch marks.

(10) Relax muscles, relieve muscle spasms, relieve muscle pain.

3.Also can push by come-and-go to decompose fatness.
4.Pull from the knee and muscle texture to upper, can improve the curve.

Treated time:20 to 30 minutes
1.Along the lymph direction, pulling to the waist.
2.From upper to down, by anticlockwise gesture, pull come-and-go.
3.Along the muscle of arm, pull up to lift and tight the muscle.

BACK
Treated time: 20 to 30 minutes
1.First by come-and-go, pushing the bladder nerve 2 to 3 times.
2.Circling by anticlockwise to stimulate the underarm lymph node.
3.On the back, by anticlockwise circling, can help to decompose the fatness.
4.Using lymph drainage gesture, pull the toxin to the lymph node, can help improving the back curve.

ARM
Treated time:30 minutes
BACK SIDE
1.From the inner elbow to the armpit, doing lymph drainage.
2.Circling to stimulate the lymph node.
3.By anticlockwise or come-and-go pushing, decomposing the fatness.
4.From the elbow to the oxter, doing tightening gesture.

Facade
1. From the elbow to the oxter, doing tightening gesture.

Abdomen
Treated time:20 to 30 minutes
1.From small to large, by clockwise direction, circling arrond the navel, can help peristalsis of the large intestine.
2.From small to large, by anticlockwise direction, circling push down.
3.From the belly and muscle texture, pull to the groin.
4.Through lymph drainage gesture, taking the toxin to the place of groin.

Techinical Parameters:

Power suppy Input:110V/220V 60HZ/50HZ

Power :130W

40K cavitation head:
Power supply output:150V
Frequency:40KHz
Power:25W

Vacuum+Bipolar RF head:
Power supply output:66V
Freqeuncy:450K
Power:95W

Tripolar RF head:
Power supply output:66V
Freqeuncy:450K
Power:35W

Face RF head:
Power supply output:66V
Freqeuncy:450K
Power:35W