Product Details

Effect:

Working Theory

Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.

Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.

The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.

When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.

10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment,

20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount

becomes very thin.

Product Description

808nm diode laser 810 hair removal

Theory
Diode laser equipment adopts 808nm, particularly effective to hair follicle melanocytes without injury surrounding tissue. The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature. When the temperature raises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.

Features

1. The optimal laser wavelength
The 808nm near infrared laser is best for melanin to absorb, so that it can be applied to different areas and depth of the hair follicle to remove any type of the hair effectively.
2. No pigmentation. Suitable for any kind of skin.
DM-808B diode laser hair removal system uses the most advanced technology that penetrates deeper than before so that the skin could absorb less laser and there is no pigmentation.
3. Sapphire contact cooling system.
It can make the treatment safer and no harm to the skin.The temperature of skin can reach 0~5°C, which allows the doctor to use the higher energy setting but bring no harm to normal skin.
4. The rectangular big spot size of 14*14mm can speed up the treatment
It could ensure high effeciency and fast speed when performing the treatment of large area hair removal. Because the spot size is big and rectangular, it could avoid repeated treatment that usually done by circular spot.
5. Repetition rate from 1 Hz to 10 Hz.
Experienced operater can use 10 Hz in motion mode to greatly accelerate the procedure, while green hands can also use 1-3 Hz stationary mode.

808nm diode laser hair removal machine for sale Parameter

1. High Power: 2000W
2. Big Spotszie: 14*14mm , Improve efficiency
3. At least 4,000,000 laser shots
4. Perfect Cooling System: Air + Water + Semi-conductor
5. Fast and effective hair removal, only need 2-3 times
6. Quality assurance: CE, ISO 13485 Certificate
7. Real Manufacturer: Acept OEM & ODM

Our service:

professional manufacture with 13 years experience, master the most advantage technologies of medical beauty equipment.
Professional R & D team, supply OEM & ODM service.
3 years warranty, lifetime free service and maintenance
Fastest delivery time, we promise arrange delivery within 5 working days.
professional service team, supply 24 hours online service.

Model Name：808nm Diode Laser Hair Removal Machine

Model No.: 808
Wavelength: 808nm
Power: 2000W
Voltage: 110-240V, 50/60Hz
Engergy: 1-120 J/cm2
Repetition Frequency: 1-10Hz
Spotsize: 14*14mm
Screen: 10 inch color touch screen, foldable
Qty of palladium bars: 12 bars
Cooling system: TEC + Spahhire Contact Cooling + Air + Water
TEC modules: 120 Watts * 2

Water flow rate in handpiece: 3.5 ~ 4.5 L/min
Power of the whole cooling module: 800W
Cooling media: Purified water
Beam type: Collimated
Double safety system: Key switch & emergency switch
Continuous working time: At least 24 hours
Pulse-width: 500ms
Volume of water tank: 5L
Pump head: 15 m/s

The superiority 808 mainly lies in the following aspects.
High power. There is 12 laser bar in the laser gun, which might be the highest configuration in this industry. Such number of bars ensures good efficacy.
Big spot size. 14*14cm spot size gives you high efficiency rapid hair removal.
Advanced cooling system. Never overlook the significance of the refrigeration system. It has much to do with the comfort, safety, longevity and continuous working hours. Our machine uses 2 pieces of TEC (Thermo Eletric Cooling) modules of the head, each power is 120 Watt. We also use sapphire window contact cooling technology. The power of the whole cooling module is 800W. It has a 5 litres water tank, and the lift of its water pump is 15m. The flow rate of water circulation is 3.5L/min. This high efficency cooling system allows you to use the machine 24 hours continuously.
At least 4 million shots longevity. Since the refrigeration system has great influence on longevity of the laser gun, as well as the quality, we can guarantee at least 4 million valid shots. If you fill the tank with deionized water, the number will increase to 6 million shots.

Detailed Images

Packing & Delivery

Packing size: 76*58*121cm

G.W: 85kg

Unique Features:

1. Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent.
2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality.
3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses.
4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement.
5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work.
6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety.