Our service :

• Professional manufacture with 13 years experience, master the most Advantage technologies of medical beauty equipment.

• Professional R & D team, supply OEM & ODM service.

• 3 years warranty, lifetime free service and maintenance.

• Fastest delivery time, we promise arrange delivery within 5 working days.

• Professional service team, supply 24 hours online service.

• 
  

Specifications

lipo cavitation machine  Model: HS-300RV+ information as follows:

Pls be noted that  Shanghai Apolo only welcome 3 kind of cooperation mode;

a. Dealer

b. Distributor  

c. OEM/ODM

So any of end-user, like clinic,spa,hospital, who only purchase one equipment for own-use,  sorry to say that Shanghai Apolo could not sell it to you as we make a promise to our distributors.

If end-user really like our equipment, pls contact with our distributors all over the world. We would tell you how to contact with them later.

Cryotherapy (fat freezing treatment) is a non-invasive (without contact) procedure in which doctors place a small suction cup on a patient's skin. The device gradually extracts body heat until the subcutaneous fat is frozen. During the procedure, the epidermis remains within a normal temperature range, which leaves the skin undamaged.

Clinical trials have shown no side effects and the procedure is painless and results are impressive. After the first session, fat deposits are reduced by 25 percent.

One procedure is likely to be enough for most patients, but manufacturers do not rule out the need for additional sessions, depending on the amount of fat a patient wants to lose.

In the machine, a specially designed cooling applicator is applied to the desired area of fat reduction to extract energy (cooling) from the underlying fat tissue without damage to other tissues. The applicator cup uses a gentle vacuum pressure to draw the tissue between the cooling panels. During the procedure, the applicator delivers precisely controlled cooling conditions that have been proven to target and eliminate fat cells in specific areas of the body. When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer.

HS-300RV+ Specifications:

1. 3 Treatment head: 2x RF(three tips :fai 37mm, fai18 and fai 28mm of each handpiece), 1x Ultrasonic Cavitation, 2*Vacuum
2. Output Mode: Mono-Polar, Bi-Polar, Ultrasound, vacuum
3. Emitted Power: RF 200W; Ultrasonic Cavitation 100W (1- 5W/cm2)
4. Frequency: RF: 1MHz; Ultrasound: 35 and plusmn; 10 KHz
5. Power output:200W
6. Line voltage:100VAC or 115VAC or 230VAC (refer to system labeling)/50/60Hz
7. Ultrasoinic frequency:40 ± 2Khz
8. Emission Head dimension 20 cm2 (50mm)
9. Emitted Power  100 Watt  (1~5 W/ cm2)
10. Pulse wavelength:1,000ms ~10,000ms (1~10 seconds)
11. Pulse interval:500ms ~ 2,000ms (0.5 ~2 seconds
12. Energy:10 ~50 level
13. Vaccum:-90~0Kpa
14. Pressure level: 1 level to 5 level adjustable
15. Frequency level: 1 level to 5 level adjustable
16. Vacuum Handpiece: 2 handpieces: 56mm &70mm
17. Shoots controllable by IC Card
18. Time setting on the screen: 0 min ~ 99 hours

Company Advantages: 

a.  Our company is one of the leading manufacturers in China ,instead of trading company, So our price is competitive. And also Factory could offer technology upgrade but trading company could not do it as they dont have engineers.

b.  Our company have passed ISO 13485 system. Very few factories have passed it,

Advantage

1. Non-anetsthasia ,no side effects

2. Good effect and no rebounding phenomenon

3. No blooding,tumidness and bruise

4. Woundless,no influence on normal working and living

as ISO 13485 is an international approval for confirming the Quality&Management system for Medical manufacturer. Some may pass ISO 9000 or 9001, as its easy to pass and only for common factories instead of medical factories.

Without ISO 13485, the environement and quality of these factories would be not regconized by developed countries.

c.  Our equipment have got CE 1023 medical approval.  Pls be noted its a medical approval, not common CE approval. Very few factoriess equipment have got CE 1023 medical approval, as CE 1023 need more strict test and very hard to pass.

With other common CE approval, you could only sell equipments to beauty salon in Europe.

With our CE 1023 approval, you could not only sell the equipments to beauty salon, but also to hospital and clinics in Europe.

d.  We're one of the most leading manufacturers in China and could offer OEM/ODM without any design fee

e.  We could offer 1~2 year warranty for parts except consumable one;

f.  We're one of the limited companies in China who have the ability to dispatch our engineers to do after-service in customers' area.

g.We have free-training to offer. 

For further details ,please directly contact with me ..

Best regards

Features

1. The entire process is completed without the need of surgery and anesthesia.

2. Does not cause the phenomenon of uneven skin.

3. Does not cause the phenomenon of bleeding,swelling and blood stasis.

4. Without side effects and the risk of gaining the weight back, the results are rather obvious.