Working Theory
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.
Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.
The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.
When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
Working Theory
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.
Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.
The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.
When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
Diode Laser Hair Removal big spot size
Technical specification comparison with Alma diode laser
Apolo Diode laser | Alma diode laser | ||
Wavelength | 810nm | Wavelength | 810nm |
Spot size | 12*16mm | Spot size | 10*12mm |
Repetition Rate | 1-10Hz | Repetition Rate | 1-10Hz |
Pulse Width | 10-400ms | Pulse Width | 20-400ms |
Energy | 1-120J/cm2 | Energy | 1-120J/cm2 |
Saphire cooling | 0-5 centigrade | Saphire cooling | 0-5 centigrade |
Laser output power | 600W | Laser output power | 600W/800W |
diode laser hair removal system
Selling Point
Bigger spot size |
12*16mm |
Italy DC pump |
6.5L/min, high lift 65 meter, ensure good water circulation |
TEC Cooling |
when the temperature exceed 25 centigrade, the TEC cooling will function automatically |
Copper radiator Effect: 10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment, 20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount becomes very thin. |
with SUS316 stainless steel water pipes in side, offer better anti-rust resistance, to ensure the purity of the water, besides, the copper is better in heat dissipation |
Effect: 10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment, 20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount becomes very thin. High speed fun |
Features 1.Safety and effectively hair removal on all skin types (I to VI) ; 2.With Sapphire Crystal on the treatment head that can be used forever; 3.Big spot size is quick and efficient for large area treatment; 4.Rotatable Color Touch Screen makes convinient operation; 5.Advanced cooling handpiece ensures patient safety and comfort. It will function when the temperature exceed 24 centigrade and the speed of the fun is automatically adjusted according the temperature.( with temperature sensor) |
Optical lense |
The optical lense never gets foggy |
easy operation |
With existance of preset parameter, easy operation , specially for the new practioner |
Cooling system power supply |
Use Emerson power supply for cooling system Unique Features: 1. Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent. 2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality. 3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses. 4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement. 5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work. 6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment. 7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety. |
810nm diode laser hair removal equipment TEC cooling
810nm diode laser hair removal equipment High speed fun with temperature sensor
IC card Control ( 810nm diode laser hair removal equipment )
1. Machine Renting
2. Salon VIP Membership.
The card can memorize customer's information and keep record for customer's treatment procedures.
Stable energy output.
According to our test, The output energy did not decrease even after 2,000,000 shots
Water filters
USB Interface, avaible for software update.
Pictures from right and left side ( 810nm diode laser hair removal equipment )
Applications for 810 nm diode laser machine.
1. Hair removal for all skin types, cause the wavelength is near infrare, so it won't cause skin damage for dark skin type, and with long pulse width, even the darker skin can get good treating result.
2. Skin rejuvenation.
HS-810 810nm diode laser hair removal equipment Handpiece
Operation Screen ( diode laser hair removal machine)
Unique Features:
2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality.
3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses.
4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement.
5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work.
6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety.
Our service:
professional manufacture with 13 years experience, master the most advantage technologies of medical beauty equipment.
Professional R & D team, supply OEM & ODM service.
3 years warranty, lifetime free service and maintenance
Fastest delivery time, we promise arrange delivery within 5 working days.
professional service team, supply 24 hours online service.