Working Theory
Effect:
10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment,
20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount
becomes very thin.
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.
Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.
The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.
When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
Effect:
10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment,
20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount
becomes very thin.
Professional 808nm Diode Laser Hair Removal Equipment
This model BS-LHR9 diode laser is targeting at the purpose of hair removing based on the light and heat theory. The pigment in the hair follicle absorbs the laser light and converts the light to heat. The heat, in turn, damages the follicle and destroys its ability to re-grow. It is important to treat each follicle during the growth cycle for maximum hair reduction. The laser pulses for just a fraction of a second, heating the hair follicle and impairing its ability to re-grow. Significantly less hair grows back with each treatment and ultimately resulting in your goal of permanent hair reduction. The number of treatments required varies from individual to individual. The diode laser light is in the advantage of its wavelength, and suitable for most kinds of skin type and color for hair removing. Due to the longer wavelength provides deeper and safer penetration into the skin than other kinds of light based hair removal, it benefits the patients with deep color skin. (Except certain part of body for black color skin people) The tiny size brings high mobility to this equipment, and it is also suitable for small clinics or even home using.
Specification:
Energy | 0 – 160J/cm2 |
Pulse Width | 0 – 800ms |
Frequency | 0.5 - 20Hz |
Touch Cooling | 0 – 4 C degrees |
Spot Size | 11mm x 11mm |
Control Panel | 10.1 Inch touch LCD |
System Cooling | Freon |
Dimension | 36 x 42 x 71 cm |
Weight | 1. Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent.
2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality.
3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses.
4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement.
5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work.
6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety.Working Theory
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.
Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.
The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.
1. Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent.
2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality.
3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses.
4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement.
5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work.
6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety.
When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
70Kg |
Power | 1200W |
Power Spec | AC220V/50Hz |
About Us |
Our Service OEM&ODM Services are available. After Sale Service: -Lifetime with professional engineer support. -Within 1 year, supply spare parts for free if the machine has manufacturer quality problem.
Our Advantages 1. Specialized in production of medical and aesthetic equipments for many years. 2. The professional and innovative engineers are the pioneers of optoelectronics in China. 3. ISO9001 proved Quality control and test system, each machine is in the best quality control. 4. CE proved machines, the key for you to legally use and sell the machine. 5. Spare parts self produced, production cost is in control. 6.We provide 1 years warranty and 2 years, the few ones in China to supply 2 years warranty. |
Any questions, pls feel free to contact me. Thanks!
My Skype: sales16(at)
Contact person: Judy Lee
Features
1.Safety and effectively hair removal on all skin types (I to VI) ;
2.With Sapphire Crystal on the treatment head that can be used forever;
3.Big spot size is quick and efficient for large area treatment;
4.Rotatable Color Touch Screen makes convinient operation;
5.Advanced cooling handpiece ensures patient safety and comfort.
Our service:
professional manufacture with 13 years experience, master the most advantage technologies of medical beauty equipment.
Professional R & D team, supply OEM & ODM service.
3 years warranty, lifetime free service and maintenance
Fastest delivery time, we promise arrange delivery within 5 working days.
professional service team, supply 24 hours online service.