Specifications
Hot Sale CO2 laser1.skin rejuvenation
2.ance & pigment removal
3.Various scars removal
Hot Sale Hot Sell co2 laser cutting machine for clothing
1.skin rejuvenation
2.ance & pigment removal
3.Various scars removal
GL080 medical laser equipment fractional co2 laser co2 fractional laser
1. Skin renewing and resurfacing
2. Smooth burnt scars and surgery scars, etc
3. Wrinkle removal, skin tightening
4. Acne and acne scar removal
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
7. OEM service
GL080 fractional co2 laser equipment Brief Introduction
Adopt RF-excited laser system enables the output quality more stable, uniform compared to CO2 fractional laser with glass tubes
fractional co2 laser Treatment Theory
Fractional laser light penetrates the skin with tiny thermal channels through the random scanning, creating an ablative and thermal effection only channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.
fractional co2 laser Application
- Application Range of Fractional treatment handpiece
- Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
- Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
- Reconstruction of photoaging skin.
- Application Range of Incision Handpiece
- Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
- In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
GLO80 fractional co2 laser Advantages
- Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes
- Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)
- Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients
- Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests' unique request.
- 12.1" TFT touch LCD, rotated 360° gives you a luxury enjoyment;
- Reserved entry access for laser room ensures a safe treatment
- Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership.
GL080 fractional co2 laser SPECIFICATION
Laser Type | CO2 |
Wavelength | 10600nm |
Beam Delivery | 7-joint arm |
Maximum Output Power | 30W/40W |
Optical Beam Quality | TEM |
Spot Size | 0.12-1.25mm (Adjustable) |
Power of the Aiming Beam | Less than 5mW |
Aiming Beam | 635nm |
Scanning Mode | Randomized Scanning |
Laser Operating Mode | UltraPulse, CW, Fractional |
Cooling | Air Cooling |
Pulse Energy | 10mj~200mj (every stepping:2mj) |
Spot Pattern | Triangle/Square/Rectangle/Rhombus |
Pulse Interval | 1ms~100ms (every stepping:1mj) |
Scan Area | 10mmx10mm,20mmx20mm,30mmx30mm |
Working Mode | Continuous operation |
Spot Density | 36 spots/cm²,144 spots/cm²,576spots/cm²,with intermittent loading |
Power Supply | AC 220V 50Hz/AC 110V 60Hz |
Net Weight | 45KGS |
Gross Weight | 60KGS |
Dimensions(before packaged) | 650mmx340mmx760mm |
Dimensions (after packaged) | 760mmx455mmx975mm |