Specifications

Er glass laser beauty machine
1.Face lifting and tightening;
2.Acne scar treatment
3.CE with LVD&EMC,ISO13485,ISO9000

Er glass laser beauty machine
1.Face lifting and tightening;
2.Acne scar treatment
3.CE with LVD&EMC , ISO13485, ISO9000

 

Treatment Theory

The Er:bium Glass fractional laser skin reconstruction system adopts fiber laser with 1550nm wavelength and installs a CPG which is arranged in matrix scanning output, emitting 50um_80um spot through a high focusing lens, the target tissue is water in the dermis, forming matrix-like hole(0.12mm)around focal spot penetration directly. The penetration depth of these small spots is about 2mm (the depth is related with solar elastic fibrotic maximum depth). At this point the normal tissue among holes generates heat bridge which starts would rehabilitation reaction and thermal effects between scarfskin and dermal tissue, then experiencing inflammation phase, proliferation phase, remodeling phase. Drugs or cosmetic essence can be applied into the wound rehabilitation reaction, 1 hour after laser irradiation, the dermal fibrous tissue arranged dense, few inflammatory cells soakage, after 3days proliferation of epidermal cells, inflammatory cells of dermal layer is increased significantly, 15 days increasing in collagen synthesis, dermal thickening. After laser irradiation there is a certain effect for skin elasticity, skin hemoglobin content, water loss through the skin, sebum content, skin moisture content but no impact on the skin melanin content.

 

APPLICATIONS

1.  Patients with mild to moderate photoaging: Rough skin, large pores, fine wrinkles, skin loosen;

2.  Wrinkles caused by sunlight or early aging wrinkles, on the lower eyelid, forehead, cheek as well as crow’s-feet;

3.  Face lifting and tightening;

4.  Acne scar treatment

 

ADVANTAGES

I.The target tissue is water, no skin type limit (Fitzpatrick 1- VI);

IIThe output spot diameter is 50-80 um, less thermal ablation and deeper penetration, no scab, no pigmentation, no scar, more safe and effective treatment;

III.Random scanning avoids thermal damage caused by heat accumulation, reducing pain of treatment;

IV.Applied 1550nm fiber laser from IPG, the maximum output power is 35W which is 2-3 times of similar equipment, ensuring a deep penetration and long life time;

V.Six scan patterns(Circle/Triangle/Square/Rectangle/Rhombus/line) are available via CPG for different parts of skin, satisfying different therapists’ unique request;

VI.Laser output spot size, energy density, scan pattern, scanning speed, spot density, scanning area are adjustable, which were controlled by the computer operating system for various lesions, the tissue can be gasified at different depths (50-2000um), to ensure a more accurate treatment;

VII.The GLO17 can be equipped with different laser power of 15W, 25W and 35W. The doctors can choose the most appropriate laser power according to treatment

 

SPECIFICATIONS

Cooling	Air Cooling
Spot Pattern	Triangle/ Square/ Rectangle / Rhombus / Round
Scan Area	5×5mm,2.5×2.5mm,1.25×1.25mm  30×30mm  20×20mm  10×10mm
Spot Density	36spots/cm2,144spots/cm2,576spots/cm2
Power Supply	AC 220V 50Hz / AC 110V 60Hz
Wavelength	1550nm
Maximum Output Power	30W/20W/10(optional)
Spot Diameter	50-2000μm
Aiming Beam	635 nm
Pulse Energy	10mj~200mj (stepping: 2mj)
Pulse Interval	1ms~100ms (stepping: 1ms)
Gross Weight	88KGS
Dimensions (before packaged)	650mm×340mm×760mm
Dimensions (After Packaged)	685mm×352mm×1200mm