Specifications

1.Work long time in high energy
2.No harm to surrounding tissues
3.No pain, no risk
4.Remove tattoos, pigments, wrinkles etc

 

 

Tattoo Removal Nd Yag Laser/ Pigmentation Removal Q Switched Nd Yag Laser/ Alexandrite laser

 

 

Treatment Scope:

A. Removal endogenous pigment: Nevus of Ota, coffee spot, age pigment, freckle etc
B. For exogenous pigment: Tattoo of body, eyeline and eyebrow
C. Skin whitenning
D. Remove striae gravidarum

 

Technical Parameter:

 

Dimensions	920× 555 ×1065mm  not including joints arm
Weight	100kg
Wastage power	800VA
Fuse	220V, 10A
Output mode	Q-switch Pulsed output
Wavelength	1064nm, 532nm
Pulse Duration	10±3ns
Frequency	1Hz, 2Hz,5Hz
Single Pulse energy	250mJ-1500mj
Safety distance	NOHD 1km.   Operator must wear goggles
Cooling system	Water cooled
Work mode	Continually work with intervals
Spot Size	Continually adjustable

 

Optical and electrical performance

 

 

Energy of single pulse	250mj-1500mj
Unstable output range	ST≤±10%
Output repeat	Rj<10%
Error of expected energy and practical energy	≤±20%
Spot diameter	1-4mm        adjustable
Focus error	≤±0.5mm
Pc output power of collimate laser	0.1mW≤Pc≤5mW
Adjustable range of Joints arm	Horizontal ≥45o   Uprightness 60cm-80cm

 

Product Image

Inner Structure

 

 

Working Principle: 

The Q-switched ND: YAG laser delivers light of specific wavelengths with high energy which are absorbed by the pigment in the tattoo and result in a shockwave. The shockwave shatters the pigment particles, releasing them from their encapsulation and breaking them into fragments small enough for removal by the body. These tiny particles are then eliminated by the body. Since this specific wavelength can only be absorbed by pigment particles, no injury to skin and normal tissues will occur.

 

Before-After Pictures:

 

 

1. 3 years warranty with lifetime free service and maintenance

2. Free training for operation of the equipment in our company, which provided by our specialized training department.

3. On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.

4. OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment.

5. professional after-sale service team, solve all the problem in time.

Our Factory:

 

1. Can you treat all colours?  

No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult. This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an existing tattoo then the darker colours will be faded or removed, allowing you greater choice of size and colour of the cover- up design you choose.

2. Will the tattoo be removed in one treatment?

No, that is very unlikely. The light can only shatter a certain amount ink in one treatment, so several treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades

more and more with every treatment you have. A test patch will be performed before a full session goes ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments and sometimes only take 1 or 2. There are several factors that influence the number of treatments required, these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.

3. What happens to my skin after treatment?

The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this

usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the treatment and the skin is usually back to normal within a few days.

4. Are there any side affects?

Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very weak. So you just need to use the energy that can make the tattoos become white, begin from our original energy. 

5. Will the laser treatment scarmy skin?

No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments more difficult.

 

 

Contact

 

Beijing Nubway S & T Development Co., Ltd

 

Room 805 No.12,Yabao Rd Chaoyang District Beijing 100020 China

 

Skype: justin2013145

 

Tell: 86-10-51206522

 

Mobile:0086-13521050632

 

TradeManager: cn1510983520