Product Details

BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment

Product Description

A revolutionary device that combines LED, Ultrasonic, Massage and Ion Therapy to uncover beautifully perfected skin. The amalgamation of these therapies combats five leading skin problems in one experience:

1,Acne and breakouts
2,Hyperpigmentation and scars
3,Fine Lines and wrinkles
4,Swelling around the eyes
5,Skin ageing

Product absorption is dramatically increased and cellular turnover is aided, resulting in a nourished, healthy and hydrated skin complexion.
Safe enough to use everyday, with no known side effects, a vital beauty must-have that will help you achieve a faultless complexion.

Treatment Theory

What is ultrasonic?

Ultrasound is a high-level sound wave technology that penetrates deeper than the dermal layer. In the skin it increases the temperature of the surrounding tissue, thus increasing oxygenation to the cells, stimulating collagen protein and aiding in the removal of waste products. This is an anti bacterial cleansing action. It benefits the skin by stimulating blood circulation, diminishing fine lines and wrinkles, clarifies acne and blemishes and can also eradicate irregular pigmentation and redness.(BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)

What is Galvanic ION (ION+ ION-)?

Galvanic IONS deeply cleanses the skin of impurities that can cause a dull and lifeless appearance. This process happens when negatively charged IONS attract and encapsulate toxins, preparing them to be removed. Following up on this, the positive IONS work to attract the encapsulated impurities from within the skin. (BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)

Not only does this treatment leave the skin thoroughly clean, but also improves oxygenation and circulation, which promotes cellular health and helps to stave off free-radical damage and premature ageing.

Different LED lights treat different skin concerns:

Red Light: (Wavelength 625+/-3nm (18 LEDs)) Brightens and evens the skin tone. Proliferates collagen protein and diminishes the appearance of fine lines and wrinkles. Tightens, firms and repairs damaged skin. An excellent repairing and anti-ageing treatment

Yellow Light: (Wavelength 592+/-3nm (18 LEDs)) Relieves irritation and aims to enhance the immunity within the skin. It also stimulates the lymphatic and nervous system, to rid the skin of toxins and increase circulation. This treatment is best for swollen and sensitive skin.

Blue Light (Wavelength 465+/-3nm (18 LEDs)) Kills bacterium from within the skin whilst diminishing inflammation and preventing acne and breakouts.

Green Light (Wavelength 525+/-3nm (18 LEDs)) Calms and balances the skin tone, this can help to break down and prevent uneven melanin (pigment) production. An excellent treatment that leaves the skin even and bright, whilst calming the skin and stimulating the lymphatic drainage system.

Face Lifting and Face Slimming:

The galvanic IONS +/-: work to increase circulation, which improves the overall health of the skin, by providing nutrition to the surface of the skin. Better penetration of products, into the deep layer of the skin. It over time leaves your skin taught and firm, whilst brightening and cleaning your skin.

Use this device with a gel, essential oil, essence, water or distilled water.

Scientific research shows that the percentage of ultrasound waves that transmit in the air is 0%, 50% in water, 60% in distilled water, 70% in a glue matter, and about 80% in conductive ultrasound gel.

Generally, the best results are achieved after 4-6 weeks, as this is when our skin renews itself, revealing fresh and treated skin to the surface. (BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)

You can do a test on your wrist before using it on your face, if you have any concerns.

Important:

The most important thing is to choose the correct skin care products that suit your skin type, can be used with the device and can treat your skin conditions. This range should then be used with this device to ensure best results.

How to use:

Use no more than three times per week, for thirty minutes each time. Choose a function and level, on the device, accordingly to your skin type and skin conditions. (BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)

Treatment 1: Cleanser (From bottom to top, inside to outside, moving slowly)

Turn on the device; select ‘Cleanse and ION+’ or ‘Deep Cleanse/ION+ & Ultrasonic’.
Using a cotton pad apply a small amount of water and cleanser to the face and massage the skin for 5-10 minutes. Move the device slowly and gently around the face, use the picture and mimic the movements shown. (BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)
Clean the probe with a damp cloth after you have finished. (This device is not waterproof, so be careful not to use too much water)

Treatment 2: Nutrition

Turn on the device and select ‘Nutrition/ION-‘ or ‘Nutrition Plus/ION- & Ultrasonic’. For this treatment use a water-based cosmetic such as, a toner, water, essence, essential oil, gel or a liquid.
Slowly move the device around the face, spending 10-15 seconds on each area. Use the pictures to guide you on what movements are best.
Clean the probe with a damp cloth after you have finished. (This device is not waterproof, so be careful not to use too much water)

Treatment 3: Photo rejuvenation Therapy

After switching the device on, select ‘Whiten/ Red &Yellow LED’.
The red light works for 5 minutes and it alternates to the yellow light for 5 minutes.
Move the probe around the face gently, spending 10-15 seconds on each area of the skin.
The red and yellow light will work to lighten dark marks, proliferate collagen and elastin.

Press ‘Anti-acne/Blue & Green LED’
The blue light will work for 5 minutes and then it will alternate to green for 5 minutes.
This treatment is especially effective for acne prone skin. Spend about 10-15 seconds per area of the skin.

Treatment 4: Acupuncture; face-lift and relax

Select the mode ‘face lift’ and massage the face. This mode will lift and slim the face.
This treatment will last 15 minutes, spend about 10-15 seconds per area. Use the pictures to guide you on what movements to do. (BP-012 multifunction home use galvanic facial machine special for Acne and breakouts treatment)

For best results

Skin whitening and dark spot correction (Do this every other day)

Choose ‘Deep’ cleanse mode on the skin. Then choose ‘Nutri-plus’ for skin perfection. Also choose the mode ‘whiten’, and the LED lights will alternate in order to effectively lighten and even out the skin.
Spend 10-15 seconds per area of the skin. Use the pictures to identify what movements to use. This treatment will last 15 minutes.

Acne Treatment (Do this every night)

When cleansing and toning the skin, select the mode ‘cleanse’ to effectively remove dirt from the skin.
Then select ‘acne-care’ and using your cream or gel massage the skin. Spending 10-15 seconds per area of the skin.
The blue and green lights will alternate and this will effectively treat breakouts and blemishes.

Sensitive skin treatment (once a week)