Product Details

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Specifications

1.Scar removal,skin care
2.Output Power:1~30W adjustable
3.LCD 8"Touch Screen
4.Best warranty

CO2 fractional Laser beauty equipment (OB-FC01)

Product Description

OB-FC 01

Wavelength: 10.6μ

Output Power: 1~30W adjustable

Micro Pulse Energy: 5mj-100mj, 16 steps adjustable

Estimated Power : 125mj-1kj

Scanner Focus : F=50mm(generation 2) or f=100mm(generation 1)

Focus Spot Diameter: ≤0.1mm(generation 2) ≤0.2mm(generation 1)

Treatment Depth: 2000μm(generation 2) 600μm(generation 1)

Indication beam: green semiconductor laser (532nm, 5mW)

System control: microcomputer control

Smoke Exhausting System: Built-in air blow

Cooling System: Built-in circulating water cooling

Display Screen: Color LCD (8 inch Touch Screen)

Transmission System: 7-Articulation Joint Spring-Balanced Light Guiding Arm

Working Model: With scanner (galvanometer scanning)

Scanning area: 0.1×0.1mm-15×15mm(generation 2)

0.1×0.1mm-20×20mm(generation 1) scanning

graphic: Rectangular, Ellipse (standard)

Scanning velocity: 0.1 to 9 cm2/s adjustable

CW: output power, 1-30w, 1w adjustable

Pulse: interval time, 0-999ms, 1ms adjustable

Ultra: Frequency, 1000hz, 1hz adjustable

Treatment control: footswitch

Environmental temperature: 5-40oC

Relative Humidity: ≤80%

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

G.W: 65kg

Machine Dimension: 45cm× 50cm ×130cm

Power Supply: AC 220V±22V; 50hz, 3Amp

I Theory:

The carbon dioxide laser (CO2 laser) was one of the earliest gas lasers to be developed

(invented by Kumar Patel of Bell Labs in 1964), and is still one of the most useful.

Carbon dioxide lasers are the highest-power continuous wave lasers that are currently available.

They are also quite efficient: the ratio of output power to pump power can be as large as 20%.

The CO2 laser produces a beam of infrared light with the principal wavelength bands centering

around 9.4 and 10.6 micrometers.

With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro

beams which are separated so that when they strike the skin surface small areas of the skin

between the beams are not hit by the laser and left intact.

These small areas of untreated skin promote a much more rapid recovery and healing

with less risk of complications.

The small areas treated by the fractional micro beams, called micro treatment zones,

cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.

OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.

II Advantages:

1. Unparalleled char-free ablation, vaporization, excision, or incision of soft tissues

2. Reduced thermal damage to surrounding tissues

3. Rapid healing and minimal downtime

4. Stimulate deeper collagen with high pulse energy

5. Adjustable scanning patterns and size

6. Adjustable intensity of pilot beam from zero to maximum

7. Adjustable pulse duration

8. Last treatment setting memorization

9. Automatic alarm system for operation and troubles

10.Covers all functions of conventional system

11.No consumable costs