Product Details

Working Principle of laser tattoo removal :

Laser technology has greatly improved the ability to treat melanocytic lesions and tattoos with the rapidly pulsed Q-switch neodymium: yttrium aluminium garnet (Nd: YAG) laser. The laser treatment of pigmented lesions and tattoos are based on principle of selected photothermolysis. The QS laser Systems can successfully lighten or eradicate a variety of benign epidermal and dermal pigmented lesions and tattoos with minimal risk of untoward effects.

Laser pigment removal machine though high energy of laser transient emission, make irradiated pigment particles absorb energy expansion rupture. Most or all of epidermal pigment group split into smaller tiny particles immediately ruled out in vitro. Part of dermal pigment group fragment into body macrophage phagocytic particles that ingest and excrete through the lymphatic system, thereby eliminating pigment. Due to normal tissue on 1064nm laser absorption is very few, maintaining the cell frame complete. No scar formation conditions. Because of the laser pigment removal is no damage to normal tissues, its security guaranteed maximum customer without complications from postoperative.

Gradually the pigment becomes lighter and lighter till disappearing. Gradually the pigment becomes lighter and ligher.

6Hz Q Switch Laser Tattoo Removal Carbon Peeling Machine

Product Description

Basic Principle

Laser tattoo removal machine spreading enough activated carbon particles on skin surface and make sure infiltrating pores, is using 1055nm laser to comminuting epidermis pigment based on bursting activated carbon particles; Meanwhile stimulate collagens regeneration and accelerate the skin metabolism. Therefore soft laser can reach perfect result for speckle removal, wrinkle removal, pore refining and skin rejuvenation.

Treatment Range

1. Pigment Removal

2. Laser Tattoo Removal

3. Skin Deep Cleaning

4. Wrinkle Removal

5. Pore Refining

6. Skin Rejuvenation

7. Acne Removal

8. Birth Marks Removal

Advantages

1. 8.4'' Color Touch Screen

2. 1-6Hz adjustable

3. High power 1500mj

4. Smart water temperature and water circulation protection programs

5. No pigment, no scar and no blisters

6. 3 different wavelengths--- 1064nm, 532nm and 1055nm

7. New design handpiece

8. Low shipping cost

Technical Parameters

Wavelength	1055nm/1064nm/532nm
Laser Type	Q Switched Nd:YAG Laser
Energy	350-1500mj Adjustable
Spot Size	2-5mm
Pulse Width	≤8ns
Cooling System	Water Cooling+Air Cooling
Frequency	1-6Hz
Interface	8.4'' Color Touch Screen
Dimension	360380870mm
Net Weight	30Kg
Power Supply	220/110V; 50/60Hz

Our Advantages

1.With infrared light, more accurate shoting treatment area.

2.Different machine chassis option matches style of hospital, clinic, salon, beauty spa, home use, etc.

3.Water temperature and water flow alarm system ensure long time safe working.

4.Germany imported laser rod ensures higher light transmittance, with better working performance.

5.Taiwan import power supply, confirm the machine stable and strong output energy.

Application

FAQ

1. Can you treat all colours?

No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult. This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an existing tattoo then the darker colours will be faded or removed, allowing you greater choice of size and colour of the cover- up design you choose.

2. Will the tattoo be removed in one treatment?

No, that is very unlikely. The light can only shatter a certain amount ink in one treatment, so several treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades

more and more with every treatment you have. A test patch will be performed before a full session goes ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments and sometimes only take 1 or 2. There are several factors that influence the number of treatments required, these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.

3. What happens to my skin after treatment?

The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this

usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the treatment and the skin is usually back to normal within a few days.

4. Are there any side affects?

Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very weak. So you just need to use the energy that can make the tattoos become white, begin from our original energy.

5. Will the laser treatment scarmy skin?

No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments more difficult.

Packaging & Shipping

Q1: What’s the delivery?

We offer the door to door services by DHL air expression. We can also offer other trasportation ways according to your demands. Such as DHL, UPS, TNT, FEDEX…

Features

1. No harm to the hair follicle and normal skin, leaving no scar.

2. Short treating time and easy operation.

3.The high quality controlled solid-state laser complying with international standard

4. Computerized with big LCD and show in double language: English and Chinese.

5.Tiny sense of pain, anesthesia is unnecessary. in most cases, no side effect

6. strong cooling + plug and play handle

Q2: What’s the delivery time?

The time period is 3-7 days.

Q3: What’s the package?

strong and beautiful aluminum alloy case/carton case/wooden case.

Q4: What’s the payment method?

T/T, WESTERN UNION,…

Q5: Do you have any timely technology supports?

Our company has a professional technology supporting team for your timely services. We prepare the technical documents for you, also you can contact us by telephone, webcam, online chat (googletalk, skype, whatsAPP, facebook…).

Q6: If the machines broken during the shipment, will you support us?

Actually, our customer will purchase the insurance before shipment, avoid any money lost from rough transportation. We will help you to solve the claims with the insurance companies to collect your money back in time.

Our Services