Working Theory

Diode laser hair removal technology is based on  the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.

Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.

The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.

When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.

Effect:

10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment,

20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount

becomes very thin.

Working Theory

Diode laser hair removal technology is based on  the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles.

Light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue.

The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.

When the temperature rasises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.

• We have two colors of this machine:

• Advantages

  1. Germany DILAS semiconductor laser bar the output power can reach to 1800W.

  2.12*20mm big spot hair removal crystals, it can save the treatment time, increase the energy output and reduce the treatment cost

  3. Super strong cooling circulatory system (water, wind and Semi-conductor)

  4. 50J output power and 400ms pulse width, which can make sure the best result of permanent hair removal and reduce the pain to the least.

  5,The head can keep working for 30 million flashes, which prove that the high cost efficiency of our machine.

  6, A full range of self-test system, predict and detect possible failures and accidents occur.

• Treatment Scope:

  Remove the unwanted hair on all parts of the body:

  A arm hair 

  B lip hair

  C armpit hair

  D back hair

  E bikini hair

  F leg hair

  G any other unwanted hair

•  Description:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Technical Parameter:
  

  Laser type	Semiconductor laser
  wavelength	808 nm
  Output Mode	pulse output
  Control Method	Touch control
  Screen Size	10.4 Inch
  Energy density	10-50J/cm2  (Deviation≤±2%)
  Pulse width range	1-400ms
  Spot size	12*20mm
  Frequency	1-10HZ
  Light spot surface temperature	0-30°C
  Cooling System	Semiconductor+built-in water+Air Cooling triple cooling systems
  Fuse specification	Ø5×25 10A
  Input Power	1000W
  Power	AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ

   

• Working Principle:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Detailed Pictures:

• The handle:

• Real pictures:

• Operation system: 

  Effect:

  10-20% hair can be easily pull out soon after treatment, 30-50% hair fall off 5-7days after treatment,

  20%-30% grow again, but thinner, after 3times treatment, most hair not grow, small amount

  becomes very thin.

  
  

  
  

• Before and after:

• Our service:

  Unique Features:

  1. Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent.
  2. German Tech--all the core components are imported , all same supplier with ALMA LASER. Germany micro channel laser bar arrays, with output 500 watt power, effective, good quality.
  3. Longest lifetime--up to 10 million pulses guaranty (handpiece), which can be used for at least 2100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses. 
  4. With mono-sapphire crystal on the treatment head ,the best to keep energy output stable and can be used forever without replacement.
  5. Fast treatment--With big spot size :12mm*12mm or 16mm*20mm make faster and more efficient treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for whole body hair removal ,painless and quick recovery without any influence on patients’ daily work.
  6. Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
  7. Self-checking system--Intelligent protection with self-checking as machine star. The machine would be stopped for work at any failure be tested and the warning information would be display with red characters. It would be more convenient for trouble shooting and more safety.

  
  

  1. 3 years warranty with lifetime free service and maintenance.

  
  

  Features 

  1.Safety and effectively hair removal on all skin types (I to VI) ;

  2.With Sapphire Crystal on the treatment head that can be used forever;

  3.Big spot size is quick and efficient for large area treatment;

  4.Rotatable Color Touch Screen makes convinient operation;

  5.Advanced cooling handpiece ensures patient safety and comfort.

  
  

  2.Free training provided by our specialized training department.

  3.On-line services, our skilled technique group will offer assistance in time.

  4.OEM/ODM services, make sure to meet your requires.

  5. Professional after-sale service team, solve all the problems for you.

• Packing:

• Shipping

• FAQ

  1. How does the diode system remove hair?

  This laser targets the pigment located in the hair follicle and shaft. The light is absorbed

  by the pigment in the hair follicle and this energy is converted to heat which results in

  damage to the hair follicle. This damage causes delayed re-growth of hair and, in most

  cases, permanent destruction of many hair follicles. Unlike electrolysis, which disables

  one hair follicle at a time, the laser reaches and treats hundreds of follicles at a time.

   

  2. Does it hurt?

  The cooling tip has a mild aesthetic property, which allows tender areas to be treated in

  a relatively painless fashion.

   

  3. How many treatments will I need?

  We recommend six treatments. In fact, it is not uncommon for a person to need seven or

  more. There are a variety of factors that can influence the total number of treatments

  any individual may require to achieve the desired results.

   

  4. What about blonde / red / grey hair?

  The laser energy is attracted to the melanin in your hair. The greater the amount of

  melanin the better the results. White or grey hair does not contain any melanin,therefore

  does not respond to treatments.

   

  5. Do I need to grow the hair out before my consultation / treatment?

  No, in fact we ask that you do shave the area you want treated. We’re actually

  targeting the anatomical structures below the skin. Surface hair interferes with this process.

   

  6. How long before I see results?

  You will see some results immediately. It takes a week or two for all of the hair in the treated

  area to fall out. After that, you will experience several weeks of no growth in the treated area.

  So you’re receiving immediate gratification while you are moving toward your long-term goal.

   

  7. Can I be treated while taking medications?

  The only medications that are prohibited for Laser Hair Removal are Accutane and Retin-A,

  which must be discontinued prior to treatment. During your consultation,

  we’ll review any medications or supplements that you are currently taking to help determine

  the appropriate fluency for your treatment.

• Our Company:

Beijing Nubway S&T Development Co., Ltd was built in 2003, which is the professional manufacturer of beauty equipments forHair removal, Skin improving& skin diseasetreatment, body slimming, teeth whiteningand hair regrowth etc. Our factory has our own professional engineers, technicians, design team, assemble team, after-sales service team in regarding research and development department. This is the basis for our company to provide the OEM or ODM service for our distributors.

• Certification:

• Contact us:

  Beijing Nubway S&T Co., Ltd 

  Mob & Whatsapp & Viber: +0086-15201538689 

  Web:  

  Tel: 0086-10-5120 6522 

  E-mail: jenny(@) 

  Skype: jennyliu891020 

Our service:

• professional manufacture with 13 years experience, master the most advantage technologies of medical beauty equipment.

• Professional R & D team, supply OEM & ODM service.

• 3 years warranty, lifetime free service and maintenance

• Fastest delivery time, we promise arrange delivery within 5 working days.

•  professional service team, supply 24 hours online service. 

•