Treatment characteristics

1.Terminator 808 + combines the benefits of all 3 wavelengths, It is groundbreaking for the laser hair removal industry.

2. combined wavelengths covering the optimal treatment spectrum 808nm 755nm 1064nm,  the treatment Characteristics for different hair

3.Virtually painless

4.All skin types, even tanned skin

• Our mainly product:

• We have two colors of this machine:

• Advantages:

  1. Germany DILAS semiconductor laser bar the output power can reach to 1800W.

  2.12*20mm big spot hair removal crystals, it can save the treatment time, increase the energy output and reduce the treatment cost

  3. Super strong cooling circulatory system (water, wind and Semi-conductor)

  4. 50J output power and 400ms pulse width, which can make sure the best result of permanent hair removal and reduce the pain to the least.

  5,The head can keep working for 30 million flashes, which prove that the high cost efficiency of our machine.

  6, A full range of self-test system, predict and detect possible failures and accidents occur.

• Treatment Scope:

  Remove the unwanted hair on all parts of the body:

  A arm hair 

  B lip hair

  C armpit hair

  D back hair

  E bikini hair

  F leg hair

  G any other unwanted hair

•  Description:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Technical Parameter:
  

  Laser type	Semiconductor laser
  wavelength	808 nm
  Output Mode	pulse output
  Control Method	Touch control
  Screen Size	10.4 Inch
  Energy density	10-50J/cm2  (Deviation≤±2%)
  Pulse width range	1-400ms
  Spot size	12*20mm
  Frequency	1-10HZ
  Light spot surface temperature	0-30°C
  Cooling System	Semiconductor+built-in water+Air Cooling triple cooling systems
  Fuse specification	Ø5×25 10A
  Input Power	1000W
  Power	AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ

   

• Working Principle:

Semiconductor laser hair removal machine is freezing through technological innovation, so that the treatment of head to negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin by specific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy can be shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hair follicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, the epidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.

• Detailed Pictures:

• The handle:

• Real pictures:

• Operation system: 

• Before and after:

  
  

  Our Services

  1.We will guarantee the quality of our equipment, all the beauty machines will have over 48 hours test, then the QC department check again the stability before packing.

   

  2.If there is a deficiency, please leave message or call us, our technical department will check the machine situation face to face on internet or you take some videos to show the situation. We will give reply and solve method within 24 hours.    

  
  

• Our service:

  1. 3 years warranty with lifetime free service and maintenance.

  2.Free training provided by our specialized training department.

  3.On-line services, our skilled technique group will offer assistance in time.

  4.OEM/ODM services, make sure to meet your requires.

  5. Professional after-sale service team, solve all the problems for you.

• Packing:

• Shipping:

• FAQ:

  1. How does the diode system remove hair?

  This laser targets the pigment located in the hair follicle and shaft. The light is absorbed

  by the pigment in the hair follicle and this energy is converted to heat which results in

  damage to the hair follicle. This damage causes delayed re-growth of hair and, in most

  cases, permanent destruction of many hair follicles. Unlike electrolysis, which disables

  one hair follicle at a time, the laser reaches and treats hundreds of follicles at a time.

   

  2. Does it hurt?

  The cooling tip has a mild aesthetic property, which allows tender areas to be treated in

  a relatively painless fashion.

   

  3. How many treatments will I need?

  We recommend six treatments. In fact, it is not uncommon for a person to need seven or

  more. There are a variety of factors that can influence the total number of treatments

  any individual may require to achieve the desired results.

   

  4. What about blonde / red / grey hair?

  The laser energy is attracted to the melanin in your hair. The greater the amount of

  melanin the better the results. White or grey hair does not contain any melanin,therefore

  does not respond to treatments.

   

  5. Do I need to grow the hair out before my consultation / treatment?

  No, in fact we ask that you do shave the area you want treated. We’re actually

  targeting the anatomical structures below the skin. Surface hair interferes with this process.

   

  6. How long before I see results?

  You will see some results immediately. It takes a week or two for all of the hair in the treated

  area to fall out. After that, you will experience several weeks of no growth in the treated area.

  So you’re receiving immediate gratification while you are moving toward your long-term goal.

   

  
  

  Working Theory

   

  1.Lasers and light sources use the principle of selective photo thermolysis to eliminate hair and its potential regrowth without damaging the surrounding skin.

   

  2.During a laser hair removal treatment, light passes through the skin and is absorbed by the melanin in the hair shaft. This absorption raises the temperature of the hair follicle and thermally destroys the cells responsible for regrowth.

   

  3.The attributes of the light (wavelength, pulse duration and power) are chosen to ensure damage to these cells and not to the rest of the skin. 

  
  

  7. Can I be treated while taking medications?

  The only medications that are prohibited for Laser Hair Removal are Accutane and Retin-A,

  which must be discontinued prior to treatment. During your consultation,

  we’ll review any medications or supplements that you are currently taking to help determine

  the appropriate fluency for your treatment.

• Our Company:

Beijing Nubway S&T Development Co., Ltd was built in 2003, which is the professional manufacturer of beauty equipments forHair removal, Skin improving& skin diseasetreatment, body slimming, teeth whiteningand hair regrowth etc. Our factory has our own professional engineers, technicians, design team, assemble team, after-sales service team in regarding research and development department. This is the basis for our company to provide the OEM or ODM service for our distributors.

• Certification:

• Contact us:

  Beijing Nubway S&T Co., Ltd 

  Mob & Whatsapp & Viber: +0086-15201538689 

  Web:  

  Tel: 0086-10-5120 6522 

  E-mail: jenny(@) 

  Skype: jennyliu891020 

Features & Advantages of 808 diode laser

1) High energy, no pigmentation, excellent treatment result can be expected at the first treatment and suitable to all types of hair .
2) Long laser width, Effective for the hair follicles produce heat accumulation, Permanent hair removal. 
3) Safety, Almost no skin scattering, no harm to the skin and sweat glands, no scar, no any side-effect 
4) Skin Touching cooling system can make momentary epidermal anesthesia, no any painless during

, increases comfort during treatment .
5) Best thermostatic water cycle system guarantee semiconductor pump can't burn cavities due to overheating. 
6) Self-checking and auto-protection mechanism to ensure the stability .

7) Strong Sapphire touch cooling system can make momentary epidermal anesthesia, no any painless during, increases comfort during treatment. 
8) Quick: Squared big spot size could prompt the treatment speed, treatment speed and efficiency. Reduce treatment time for original 1/5. 
9) The power module design is suitable for import and export business. It is convenient to maintenance.