Product Details

Principle:

Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

Principle:

Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

Strech mark removal portable fractional co2 laser device

Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

rf tube co2 fractional laser machine

The scope of treatment:

1.Fractional function,

2.Skin Rejuvenation

3.Skin Tightening, Aging Skin Treatment

4.Collagen Stimulation

5.Smooth out wrinkles and fine lines

6.Flatten worry and frown lines

7.Clearing sun-damaged skin

8.Shrinking the appearance of pores

9.Remove age/sun spots on the skin

10.Acne and acne scar removal

11.Remove intractable chloasmas and pigmentation;

12.Eliminate striae gravidarum

13.Rejuvenate your neck, chest and hands etc.

14.Flatten traumatic scars

Cutting function (this only can be operated by professional doctors)

1.Smooth burnt scars and surgery scars, dermabrasion, etc.

2.Actinic keratosis

3.Basal cell carcinoma

4.Laser skin resurfacing

5.Eliminate the scar: Traumatism, operation, Burn debridement,

Cosmetic surgery,

6.Decrease jowls and improve angle of the jaw

7.Reshape, slightly enlarge, and give firmness to lips

8.Remove mole, verrucous, and small tumors of the skin

9.Hemangioma lesions

10.Blepharoplasty

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$ $Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$ $Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$ $Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

Product Description:

Ultrapulse treatment is a "fractional" treatment that produces thousands of deep, tiny colums in your skin, called microscopic treatment zones. FLT is "fractional" in that it treats old epidermal pigment cells without affecting any of the surrounding tissue, which reduces healing time (about 24 hors) and promotes the skin's natural process for creating new, healthier tissue to replace the damaged cells. Ultra pulse treatment is a safe, non-invasive procedure that allows you to rediscover the fresh, healthy skin of your youth.

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

Scanning Shapes:
You can choose 6 different scanning shaps,also you can change the size of scanning shaps at will according to your own needs.So the beam of light can achieve the treatment area accurately.

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

Technical parameter:

Laser type	Carbon dioxide laser
Output	Ultra pulse launch
Wavelength	10600nm
Light spot	0.12 mm(glass laser pipe)
Power	40w
Output route	Hinged arm
Voltage	220V 50HZ ,110V 60HZ
Net Size	109X50X40 cm
Net Packing Size	142X54X67 cm

Fractional Co2 laser treatment:

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

our staff treatment photos:

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

treatment effect :

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

FAQ

What does the treatment involve?
The treatment involves using the laser over a complete area or whole face. It is not suitable for a single wrinkle line or fold.

A numbing cream is applied to the area for at least 1-2 hours prior to treatment, and in some cases local an aesthetic injections are used. Pain puffers and medication can also be used if needed.

The laser is applied to the affected areas. At the end of the treatment the area will look like small white or red dots that disappear by the following day. There is usually redness that lasts at least 7 days, and swelling for a few days. Most people need about 5 days off work.

How many treatments will I need?
Depending on the degree or wrinkling or scarring and your expectations, you would usually need 1-3 treatments. Some people need more, especially those with severe acne scarring.

Is Fraco2 painful?
Pain really depends on how strong you use the Fraco2 laser. In most cases, it is essential to use at least a numbing cream, and often local anaesthetic injections are also used. For increased comfort, pain puffers and other painkillers may be used.
After the treatment, there is some discomfort for about 1 hour. It is best relieved by using ice, cold air, or cold compresses.

What do I look like after the treatment with Fraco2?
Immediately after the treatment you will look red, with tiny white dots, or pinpoint bleeding on your skin. These dots usually disappear the next day. Swelling will last a few days and redness at least 7 days. You can apply makeup usually after 3 days, but you usually need a few days (5-7) days off work.

What precautions do I need before the treatment?

There are no special precautions before the treatment except:

1.If you have a history of cold sores, you may need to take an anti cold sore tablet starting the day before treatment.

2.If you have recently taken Ro Accutane for acne, you may more suited to non ablative fractional laser, eg,

What are the risks and complications associated with the Fraco2 laser?
Compared to the older non fractionated CO2 lasers, the risks are far less, but may include:

1.Prolonged Redness

2.Infection

3.Pigmentation. This can be treated with bleaching lotions.

4.Scarring

5.Decrease skin pigmentation

6.Incomplete wrinkle removal

fractory show

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

our services

1. 3 years warranty with lifetime free service and maintenance

2. Free training for operation of the equipment in our company, which provided by our specialized training department.

3. On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.

4. OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment

5. Professional after-sale service team, solve all the problems in time

$Professional fractional co2 medical laser equipment with rf tube co2 fractional laser machine$

Hifu slimming –HifuShape :

http://preview.china.cn/product/60264793206-800837963/High_Intensity_Focused_Ultrasound_HIFU_body_slimming_machine.html

http://preview.china.cn/product/60264757260-800837963/weight_loss_equipment_shape_and_slim_portable_hifu.html

cryolipolysis slimming

C325:

http://preview.china.cn/product/60251762375-800408527/Fat_Cavitation_Device_For_Home_weight_Loss_Machine_rf_pro_Cryolipo.html

C132:

http://preview.china.cn/product/60251762373-800408527/Fat_Cavitation_Device_For_Home_Weight_Loss_Machine_RF_Pro_Cryolipo.html

C122

http://preview.china.cn/product/60263581188-800408527/cryolipolysis_criolipolisis_fat_reducing_freezing_cryolipolysis_machine.html

diode laser hair removal :

http://preview.china.cn/product/60263834728-800397172/laser_hair_removal_instrument_laser_hair_removal_diode_laser.html

http://preview.china.cn/product/60264829854-800397172/laser_hair_removal_supplies_laser_hair_removal_machine_painless_laser_hair_removal_system.html

http://preview.china.cn/product/60260460712-800397172/portable_Type_Nicole_Contact_Cooling_NBW_808nm_Laser_Diode_Hair_Removal.html

SHR:

http://preview.china.cn/product/60263729989-800397076/I323_ipl_laser_hair_removal_machine_ipl_shr_hair_removal.html

IPL :

http://preview.china.cn/product/60251861734-800397171/IPL_Skin_Rejuvenation_Machine_Home_USe.html

http://preview.china.cn/product/60254171212-800397171/e_light_ipl_rf_system_body_hair_removal.html

1. How do I know if I need CO2 laser?

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect?

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

Brief Introduction

3. Is there another way to get the same effect?

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

1. How do I know if I need CO2 laser?

2. What benefits can I expect?

3. Is there another way to get the same effect?