Strech mark removal portable fractional co2 laser device
fractional co2 laser wrinkle removal fractional co2 laser/medical laser
fractional co2 laser wrinkle removal fractional co2 laser/medical laser
co2 fractional laser The scope of treatment:
1.Fractional function,
2.Skin Rejuvenation
3.Skin Tightening, Aging Skin Treatment
4.Collagen Stimulation
5.Smooth out wrinkles and fine lines
6.Flatten worry and frown lines
7.Clearing sun-damaged skin
8.Shrinking the appearance of pores
9.Remove age/sun spots on the skin
10.Acne and acne scar removal
11.Remove intractable chloasmas and pigmentation;
12.Eliminate striae gravidarum
13.Rejuvenate your neck, chest and hands etc.
14.Flatten traumatic scars
Cutting function (this only can be operated by professional doctors)
1.Smooth burnt scars and surgery scars, dermabrasion, etc.
2.Actinic keratosis
3.Basal cell carcinoma
4.Laser skin resurfacing
5.Eliminate the scar: Traumatism, operation, Burn debridement,
Cosmetic surgery,
6.Decrease jowls and improve angle of the jaw
7.Reshape, slightly enlarge, and give firmness to lips
8.Remove mole, verrucous, and small tumors of the skin
9.Hemangioma lesions
10.Blepharoplasty
Product Description:
Ultrapulse treatment is a "fractional" treatment that produces thousands of deep, tiny colums in your skin, called microscopic treatment zones. FLT is "fractional" in that it treats old epidermal pigment cells without affecting any of the surrounding tissue, which reduces healing time (about 24 hors) and promotes the skin's natural process for creating new, healthier tissue to replace the damaged cells. Ultra pulse treatment is a safe, non-invasive procedure that allows you to rediscover the fresh, healthy skin of your youth.
Scanning Shapes:
You can choose 6 different scanning shaps,also you can change the size of scanning shaps at will according to your own needs.So the beam of light can achieve the treatment area accurately.
Laser type | Carbon dioxide laser |
Output | Ultra pulse launch |
Wavelength | 10600nm |
Light spot | 0.12 mm(glass laser pipe) |
Power | 40w |
Output route | Hinged arm |
Voltage | 220V 50HZ ,110V 60HZ |
Net Size | 109X50X40 cm |
Net Packing Size | 142X54X67 cm |
our staff treatment photos:
FAQ
How does FRACO2 work?
Fraco2 works by producing columns of laser beams which precisely penetrate to the level of wrinkles or scars, and stimulate your own skin to replace the old collagen with new “baby” collagen. In between the laser beams, the skin remains intact, allowing healing to occur quickly.
Who is suitable for Fraco2?
1.Moderate to severe facial wrinkles
2.Moderate wrinkles neck, hands
3.Sun damage and brown spots
4.Acne and other Scarring
What does the treatment involve?
The treatment involves using the laser over a complete area or whole face. It is not suitable for a single wrinkle line or fold.
A numbing cream is applied to the area for at least 1-2 hours prior to treatment, and in some cases local an aesthetic injections are used. Pain puffers and medication can also be used if needed.
The laser is applied to the affected areas. At the end of the treatment the area will look like small white or red dots that disappear by the following day. There is usually redness that lasts at least 7 days, and swelling for a few days. Most people need about 5 days off work.
How many treatments will I need?
Depending on the degree or wrinkling or scarring and your expectations, you would usually need 1-3 treatments. Some people need more, especially those with severe acne scarring.
Is Fraco2 painful?
Pain really depends on how strong you use the Fraco2 laser. In most cases, it is essential to use at least a numbing cream, and often local anaesthetic injections are also used. For increased comfort, pain puffers and other painkillers may be used.
After the treatment, there is some discomfort for about 1 hour. It is best relieved by using ice, cold air, or cold compresses.
What do I look like after the treatment with Fraco2?
Immediately after the treatment you will look red, with tiny white dots, or pinpoint bleeding on your skin. These dots usually disappear the next day. Swelling will last a few days and redness at least 7 days. You can apply makeup usually after 3 days, but you usually need a few days (5-7) days off work.
What precautions do I need before the treatment?
There are no special precautions before the treatment except:
1.If you have a history of cold sores, you may need to take an anti cold sore tablet starting the day before treatment.
2.If you have recently taken Ro Accutane for acne, you may more suited to non ablative fractional laser, eg,
What do I do after the treatment?
After the treatment, in most cases you will
1.Take antibiotics to prevent infection (depending on the doctor’s decision)
2.Use light non greasy moisturizer and sunscreen, the clinic will recommend one that is suitable for your skin.
3.You may wish to take anti swelling tablets for a few days.
4.You may wish to use compresses with white vinegar and water for the first 24 hours to reduce swelling.
5.Apply makeup after the a few days.
6.Wash your skin with a gentle cleanser eg Cetaphil lotion.
7.If you have darker skin, you may need to use a bleaching lotion after the treatment to prevent post treatment increase in skin pigmentation.
What sort of result can I realistically expect?
After one treatment session, depending on the strength of the treatment, you should notice a significant improvement in wrinkles especially around the eyes. Lines around the mouth are more difficult and may need more than one session.
Acne scars usually show more improvement with the fractionated CO2 laser than with the older laser after the first treatment.
What are the risks and complications associated with the Fraco2 laser?
Compared to the older non fractionated CO2 lasers, the risks are far less, but may include:
1.Prolonged Redness
2.Infection
3.Pigmentation. This can be treated with bleaching lotions.
4.Scarring
5.Decrease skin pigmentation
6.Incomplete wrinkle removal
our services
1. 3 years warranty with lifetime free service and maintenance
2. Free training for operation of the equipment in our company, which provided by our specialized training department.
3. On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.
4. OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment
5. Professional after-sale service team, solve all the problems in time