Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

60W COHERENT RF Tube Fractional CO2 Laser Estetica Skin Rejuvenation Beauty Machine

Fractional Co2 Laser Machine:Co2 Fractional Laser system is utilizing the most advanced micro-lens technology, which allows laser system to produce a large number of ultra-pulsed beams, these ultra-pulsed beams act on the skin to form a diameter of 0.12mm-1.25mm, depth of 0.1mm-1mm micro-hole, so that a large number of micro-invasive skin area (micro thermal zone) and heat accumulation zone or micro-heating area are formed, they also can form regional gasification that act on the skin pigment organization, while the heat’s accumulation in the dermis will make collagen protein do immediate skin contraction, and proliferate the collagen, then achieves the effect of wrinkle removal, scars removal, skin rejuvenation and solve skin problems and abnormal pigment removal.

Treatment Range

1. Laser wrinkle removal
2. Laser scar removal
3. Syringoma and steatoadenoma removal;
4. Seborrheic keratosis and actinic keratosis treatment;
5. Skin Rejuvenation
6. Striae gravidarum removal
7. Vaginal rejuvenation

Advantages

1. Used both on the epidermis and dermis;
2. No ablation and no intervention to skin;
3. The risk of formatting scar and pigmentation has been largely reduced;
4. Do not influence your common work;
5. Long time keeping and short time recovery and with sequel

Technical Parameters:

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

Treatment Picture

 More Pictures of Fractional Co2 Laser Machine

Raynol (Beijing) Technology Co., Ltd. is a supereminent professional manufacturer, which specialized in medical & beauty Laser devices such as Q-switch Nd:YAG System, IPL Machine, E-light Machine, RF Device, Fractional Laser System, Cryolipolysis System and Ultrasound Cavitation Device etc., We have the most advanced technology, excellent team and perfect after-sales service. 

Certification 

Purchase Process 

1.How does FRACO2 work?
Fraco2 works by producing columns of laser beams which precisely penetrate to the level of wrinkles or scars, and stimulate your own skin to replace the old collagen with new “baby” collagen. In between the laser beams, the skin remains intact, allowing healing to occur quickly.

2.Who is suitable for Fraco2?

Moderate to severe facial wrinkles; Moderate wrinkles neck, hands; Sun damage and brown spots; Acne and other Scarring;

3.What does the treatment involve?
The treatment involves using the laser over a complete area or whole face. It is not suitable for a single wrinkle line or fold.

A numbing cream is applied to the area for at least 1-2 hours prior to treatment, and in some cases local an aesthetic injections are used. Pain puffers and medication can also be used if needed.

The laser is applied to the affected areas. At the end of the treatment the area will look like small white or red dots that disappear by the following day. There is usually redness that lasts at least 7 days, and swelling for a few days. Most people need  about 5 days off work.

4.How many treatments will I need?
Depending on the degree or wrinkling or scarring and your expectations, you would usually need 1-3 treatments. Some people need more, especially those with severe acne scarring.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

5.Is Fraco2 painful?
Pain really depends on how strong you use the Fraco2 laser. In most cases, it is essential to use at least a numbing cream, and often local anaesthetic injections are also used. For increased comfort, pain puffers and other painkillers may be used.

6.What precautions do I need before the treatment?
If you have a history of cold sores, you may need to take an anti cold sore tablet starting the day before treatment.

If you have recently taken Ro Accutane for acne, you may more suited to non ablative fractional laser, eg, Fraxel.

7.What do I do after the treatment?
Take antibiotics to prevent infection (depending on the doctor’s decision).Use light non greasy moisturizer and sunscreen, the clinic will recommend one that is suitable for your skin.

You may wish to take anti swelling tablets for a few days.

You may wish to use compresses with white vinegar and water for the first 24 hours to reduce swelling.

Apply makeup after the a few days. Wash your skin with a gentle cleanser eg Cetaphil lotion.

If you have darker skin, you may need to use a bleaching lotion after the treatment to prevent post treatment increase in skin pigmentation.

If have anything please feel free to contact with us !!!

Features:

1. Reduced thermal damage to surrounding tissues

2. Rapid healing and minimal downtime

3. Stimulate deeper collagen with high pulse energy

4. LCD display panel provides easy operation with the latest microprocessor technology

5. Adjustable scanning patterns and size

6. Adjustable intensity of pilot beam from zero to maximum

7. Adjustable pulse duration

8. Last treatment setting memorization

9. Automatic alarm system for operation and troubles

10. Covers all functions of conventional system

11. No consumable costs