Product Details

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.

Health Beauty Equipment Wrinkle Removal Scar Remvoal Price Fractional Co2 Laser 40W

Product Description

Fractional Co2 Laserskin rejuvenationand solve skin problems and abnormal pigment removal.

Treatment Range

1. Laser wrinkle removal
2. Laser scar removal
3. Syringoma and steatoadenoma removal;
4. Seborrheic keratosis and actinic keratosis treatment;
5. Skin Rejuvenation
6. Striae gravidarum removal

Advantages:

1. Medical CE & RoHS approved

2. 10.4'' color touch screen

3. Professional operation program

4. High power 40W

5. 100% import light guide parts

6. 100% import option scanner system

Technical Parameters:

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Laser Type	Co2 Laser
Work Program	Fractional and Scans
Wavelength	10600nm
Spot Size	0.12-1.25mm
Laser Emitter	40W
Penetration Depth	0.1-1mm
Out Put Way	7 Articulated Arms
Interface	10.4" Color Touch Screen
Dimension	4505501400mm
Cooling System	Air Cooling+Water Cooling
Power Supply	220V/110V; 50/60Hz

Before & After

Main Technical Parameters:

Laser wavelength: 10.6µm

Laser unit:TEM00 module Co2 unit (best quality for the facula)

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm

Pulse width: the minimum pulse width is 0.1ms

Packaging & Shipping

Our Services

FAQ

How does Fractional Co2 Laser works?
Fractional Co2 Laser works by producing columns of laser beams which precisely penetrate to the level of wrinkles or scars, and stimulate your own skin to replace the old collagen with new “baby” collagen. In between the laser beams, the skin remains intact, allowing healing to occur quickly.

Who is suitable for Fractional Co2 Laser?

1. Moderate to severe facial wrinkles

2. Moderate wrinkles neck, hands

3. Sun damage and brown spots

4. Acne and other Scarring

What does the treatment involve?
The treatment involves using the laser over a complete area or whole face. It is not suitable for a single wrinkle line or fold.

A numbing cream is applied to the area for at least 1-2 hours prior to treatment, and in some cases local an aesthetic injections are used. Pain puffers and medication can also be used if needed.

The laser is applied to the affected areas. At the end of the treatment the area will look like small white or red dots that disappear by the following day. There is usually redness that lasts at least 7 days, and swelling for a few days. Most people need about 5 days off work.

How many treatments will I need?
Depending on the degree or wrinkling or scarring and your expectations, you would usually need 1-3 treatments. Some people need more, especially those with severe acne scarring.

Is Fractional Co2 Laser painful?
Pain really depends on how strong you use the Fractional Co2 Laser. In most cases, it is essential to use at least a numbing cream, and often local anaesthetic injections are also used. For increased comfort, pain puffers and other painkillers may be used.

After the treatment, there is some discomfort for about 1 hour. It is best relieved by using ice, cold air, or cold compresses.

What do I look like after the treatment with Fractional Co2 Laser?
Immediately after the treatment you will look red, with tiny white dots, or pinpoint bleeding on your skin. These dots usually disappear the next day. Swelling will last a few days and redness at least 7 days. You can apply makeup usually after 3 days, but you usually need a few days (5-7) days off work.

What do I do after the treatment?

1.Take antibiotics to prevent infection (depending on the doctor’s decision)

2.Use light non greasy moisturizer and sunscreen, the clinic will recommend one that is suitable for your skin.

3.You may wish to take anti swelling tablets for a few days.

4.You may wish to use compresses with white vinegar and water for the first 24 hours to reduce swelling.

5. Apply makeup after the a few days.

6. Wash your skin with a gentle cleanser eg Cetaphil lotion.

7. If you have darker skin, you may need to use a bleaching lotion after the treatment to prevent post treatment increase in skin pigmentation.

What sort of result can I realistically expect?