Maquina de Depilacion 755nm Alejandrita Laser
USD $1 - $2 /Set
Min.Order:1 Set
Raynol (Beijing) Technology Co., Ltd.
How Alexandrite Laser Machine Works?
Alexandrite Laser Machine (ROYAL-AL755) is the Gold Standard for permanent laser hair removal in Fitzpatrick skin type I-VI. ROYAL-AL755 is a multifunction laser hair removal machine that combines 755nm Alexandrite laser with 1064nm Nd:YAG laser very well. Laser hair removal is based on preferred absorption in the chromophore melanin, which is mainly found in the hair shaft, and in a smaller amount in the skin, depending on the Fitzpatrick skin type. The target is the pigment in the hair follicle which absorbs the heat that destroys the cells lining the hair follicle specifically around the bulb, bulge, and vascular supply. The high fluency along with the big spot size and the fast repetition rate (up to 50Hz) allows the removal of hair follicles in any area of the human body.
Treatment Rage of Alexandrite Laser Machine
1. Hair removal
2. Skin tightening
3. Skin rejuvenation
4. Wrinkle removal
5. Large pore refining
6. Acne removal
7. Vascular removal
8. Leg Veins removal
9. Telangiectasia removal
10. Pigment removal
11. Hemangioma removal
12. Onychomycosis removal
Advantages of Alexandrite Laser Machine
1. 8.4'' Color Touch Screen
2. Multifunction 2 in 1 beauty machine (755nm Alexandrite Laser and 1064nm Nd:YAG Laser)
3. 100% import long lifespan optical fiber
4. Fast repetition rate (up to 50Hz)
5. High energy (up to 100j)
6. 100% import laser generator
7. 100% import auto scanning system can reduce overlap irradiation and irradiation leakage.
8. Low spare parts cost.
Specifications of Alexandrite Laser Machine
Laser Type | Alexandrite Laser (Standard) | Nd:YAG Laser (Optional) |
Wavelength | 755nm | 1064nm |
Pulse Width | 0.5-200ms | 0.1-200ms |
Maximum Energy | 35j | 100j |
Repetition Rate | 0.5-20Hz | 0.5-50Hz |
Spot Size | 4mm, 7mm | 2mm, 4mm |
Operation Interface | 8.4" Color Touch Screen | |
Cooling System | Water Cooling+Air Cooling | |
Aiming Beam | Red Light | |
Optical Fiber | Φ1000um*3m | |
Handpiece | With Scanning System | |
Power Supply | 220/110V; 50/60Hz | |
System Dimensions | 700*370*670mm | |
Net Weight | 68Kg |
Before & After
755nm Alexandrite Laser (the right side one) in customer's clinic
1. What is the Alexandrite Laser?
An Alexandrite Laser is a type of Laser (light amplification by stimulated emission of radiation) that emits high energy light through an alexandrite crystal. As the light passes through the alexandrite crystal, a beam of light 755nm long is produced.
Note: The wavelength of the beam of light determines how far into the skin the laser penetrates.
The color of the Alexandrite laser light is red.
Alexandrite Laser also available in Q-switch mode, which causes the laser to produce a high energy beam of light in short pulses. This is what makes it effective for hair removal.
In addition to hair removal, Alexandrite Laser are used for:
1) Age spot removal
2) Spider vein removal
3) Vascular birthmarks removal
2. Advantages of the Alexandrite Laser
Alexandrite Laser is considered the most efficient laser for use with all hair and skin types, as the laser does not affect darker skin types as much as other lasers. As with all other lasers, it is best with white and very light skin, and has proven most effective with the fine, thin hairs that many of the other types of laser can't eliminate.
The wavelength of light emitted from the Alexandrite Laser is easily absorbed by the melanin (pigment cells) in your hair, which causes those cells to be heated and ultimately destroyed.
Note: For very dark skin types, the best option is the Nd:YAG laser or 808nm diode laser, as the beam's extra length will penetrate the hair follicles without affecting the skin pigment as much.
3. Where is the Alexandrite Laser Used?
Alexandrite laser is powerful equipment and should only be used by a trained practitioner, therefore they are often used in laser clinic / beauty salon / SPA / beauty center.
4. Alexandrite Laser Effectiveness
With the Alexandrite Laser, there is a hair clearance rate of roughly 70% after the recommended number of treatments--usually between 6 and 8 for thinner hair, or 8 to 12 for thicker, darker hair. See clinical studies for more information on hair reduction effectiveness.
Alexandrite Laser is also considered the fastest of the lasers, removing large swaths of hair in fewer sessions. For patients interested in treating larger body areas (such as the stomach, chest, back, shoulders, or legs), it's often recommended to use the Alexandrite Laser.
Alexandrite Laser is one of the only lasers recommended for treating hypertrichosis, also known as "Ambras syndrome".
Raynol (Beijing) Technology Co., Ltd. is a supereminent professional manufacturer, which specialized in medical & beauty Laser devices such as HIFU, Liposonix, Alexandrite Laser, Q-switch Nd:YAG Laser Tattoo Removal Machine, IPL Machine, E-light Machine, RF Device, 808nm Diode Laser Hair Removal Machine, Fractional Laser System, Cryolipolysis System and Ultrasound Cavitation Device etc., We have the most advanced technology, excellent team and perfect after-sales service. We are in according with our mission as ‘Sincere Cooperation; Win-win Future’. Also we are the pioneer OEM & ODM to supply all kinds of beauty equipments.
Purchase Procedures