Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

Specifications

1.CO2 laser hair removal beauty machine
2. RF tube or glass tube;
3. colorful t

standing multifunctional Vaginal tightening Fractional Co2 laser skin care beauty equipment

 

  The principle of  standing multifunctional Vaginal tightening Fractional Co2 laser co2 fractional rf 

 the co2 laser,with a specific wavelength of 10.6 um can be absorbed by human body tissue(no matter what color the skin is )almost by 100%,with the laser slightly passing through the skin.it is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting,cauterizing,gasification and accurate micorsurgery,most optical knives use co2 laser source.The treatment is a fractional treatment that produces thousands of deep, tiny columns in your skin, called, microscopic treatment zones. The system is in that it intensively treats old epidermal pigment cells without affecting any of the surrounding tissue, which reduces healing time (about 24 hours) and promotes the skin's natural process for creating new, healthier tissue to replace the damaged cells. It is a safe, non-invasive procedure that allows you to rediscover the fresh, healthy skin of your youth.

 

 

Laser’s wavelength	10600nm	Graphic area	≤ 20mm × 20mm
Wavelength of the target	532 nm	Mode of Spot	single-mode
Power of Target optical	≤ 5mw	Operation	Intermittent and continuous work
Diameter of Focal spot	0.25mm	Scan mode	switching: order, disorder, parallel
Area of Focal spot	0.05mm2	Refrigeration system	Air-cooled
Output Power	≥30W (optional)	Optical system	7 articulated arms
Operating voltage	AC 220V, 110V ± 10%, 50Hz	Output mode	Super-pulse dot-matrix
Net weight	40Kg	Gross weight	70kg
Output graphic	triangle / square / rectangle / circle/ Oval / hexagon / linear (scalable)

Principle of RF CO2 Fractional Laser

 

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

 

 

 

  The scope of treatment

1· Acne scars

2· Actenic keratoses

3·Skin cut: for warts removal, naevus removal, acrochordon removal, polypus

4· Basal cell carcinoma

5· Burn debridement

6· Laser skin resurfacing

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

7· Eliminate the scar: Traumatism, operation

8· Improve texture tone and pore size

9· Erase unwanted brown spots

10· Smooth wrinkles around the eyes and mouth

11· Rejuvenate your neck, chest and hands etc

12·Skin Whitening & Tightening, wrinkle Remova

13·Pore shrinking

14·Striae Gravidarum Removal, Tone &Texture Improvement

15·Syringoma and Steatoadenoma Removal

16·Treatment of Actinic keratoses & Seborrheic keratosis

 scanning head and Mains voltageof standing multifunctional Vaginal tightening Fractional Co2 laser co2 fractional rf

 

 

 

 

 

our company landscape and products line                                 

 

  

 

 

 

 

 

 

Application:

 

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc