Application:

Main Technical Parameters:                                              

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Specifications

  perfect RF pigment removal vaginal tightening laser equipment co2 fractional for salon use

The co2 laser uses a unique head piece which tracks the CO2 10.6 um wavelength light as it passes light through its optical lens to penetrate the skin. We can control the depth of the penetration from only a few micrometers in depth (only as deep as a few sheets of paper) to much deeper with tiny thermal channels. This will also determine the length of healing, the number of treatments and the cost. Each thermal channel creates a small micro-injury but does not significantly disturb or disrupt the surrounding tissue.

These microscopic injuries caused by the laser (around 15-20% of the treated area) are the beginning of the healing process. By creating thousands of these perforations underneath the skin, your epidermis layer starts to heal from the edge of these microscopic perforations very quickly. By healing so fast it remodels, tightens and stimulates the collagen, your skin tightens, which in turn smooths out lines, and significantly improves your skins tone and complexion.

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

2· Actenic keratoses

3·Skin cut: for warts removal, naevus removal, acrochordon removal, polypus

4· Basal cell carcinoma

5· Burn debridement

6· Laser skin resurfacing

7· Eliminate the scar: Traumatism, operation

8· Improve texture tone and pore size

9· Erase unwanted brown spots

10· Smooth wrinkles around the eyes and mouth

11· Rejuvenate your neck, chest and hands etc

12·Skin Whitening & Tightening, wrinkle Remova

13·Pore shrinking

14·Striae Gravidarum Removal, Tone &Texture Improvement

15·Syringoma and Steatoadenoma Removal

16·Treatment of Actinic keratoses & Seborrheic keratosis

product details

 

scanning head and Mains voltageof perfect RF pigment removal vaginal tightening laser equipment co2 fractional for salon use

 

 

Product Effects

 

Use effect

 

Company Information

 

 

 

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.