Product Details

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Beauty equipment (CE certificate) USA RF tube Fractional CO2 laser vaginal tightening

Product Description

Product Description:

ultrapulse treatment is a "fractional" treatment that produces thousands of deep, tiny colums in your skin, called microscopic treatment zones. FLT is "fractional" in that it treats old epidermal pigment cells without affecting any of the surrounding tissue, which reduces healing time (about 24 hors) and promotes the skin's natural process for creating new, healthier tissue to replace the damaged cells. Ultra pulse treatment is a safe, non-invasive procedure that allows you to rediscover the fresh, healthy skin of your youth .

working principle

Working principle

The zj270 laser, with a specific wavelength of 10.6 um can be absorbed by human body tissue (no matter what color the skin is) almost by 100%,

with the laser slightly passing through the skin. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-lood cutting, cauterizing, gasification and accurate microsurgery, most optical knives use co2 laser source

th treatment is a fractional treatment that produces thousands of deep, tiny columns in your skin, the syste is in that it intensively treats old epidermal pigment cells without affecting any of the surrounding tissue, which reduces healing time (about 24 hours) and promotes the skin’s natural process for creating new, healthier tissue to replace the damaged cells. It is a safe, noninvasive procedure that allows you to rediscover the fresh, healthy skin of your youth.

Scanning Shapes

You choose 6 different canning shaps,also you can change the size of scanning shaps at will

specification

Laser’s wavelength	10600nm	Graphic area	≤ 20mm × 20mm
Wavelength of the target	532 nm	Mode of Spot Principle of RF CO2 Fractional Laser CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.	single-mode
Power of Target optical	≤ 5mw	Operation	Intermittent and continuous work
Diameter of Focal spot	0.25mm	Scan mode	switching: order, disorder, parallel
Area of Focal spot	0.05mm2	Refrigeration system	Air-cooled
Output Power	≥30W (optional)	Optical system	7 articulated arms
Operating voltage	AC 220V, 110V ± 10%, 50Hz	Output mode	Super-pulse dot-matrix
Net weight	35Kg	Gross weight	60kg
Output graphic	triangle / square / rectangle / circle/ Oval / hexagon / linear (scalable)

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Treatment effect

The scope of treatment

Fractional function

Skin Rejuvenation

Skin Tightening, Aging Skin Treatment

Collagen Stimulation

Smooth out wrinkles and fine lines

Flatten worry and frown lines

Clearing sun-damaged skin

Shrinking the appearance of pores

Remove age/sun spots on the skin

Acne and acne scar removal

Remove intractable chloasmas and pigmentation;

Eliminate striae gravidarum

Rejuvenate your neck, chest and hands etc.

Flatten traumatic scars

Cutting function (this only can be operated by professional doctors)

Smooth burnt scars and surgery scars, dermabrasion, etc.

Actinic keratosis, ,

Basal cell carcinoma

Laser skin resurfacing

Eliminate the scar: Traumatism, operation, Burn debridement,

Cosmetic surgery,

Decrease jowls and improve angle of the jaw

Reshape, slightly enlarge, and give firmness to lips

Remove mole, verrucous, and small tumors of the skin

Hemangioma lesions

Blepharoplasty

Detailed Images

Before-After pictures

FAQ

Q1.What are the benefits of Fractional treatment? Smoother, fresher looking skinImproved tone and textureReduce wrinkles around the eyesImproved appearance of acne scars and surgical scars

Q2.Has Fractional treatment received FDA-clearance?

The Fractional laser received FDA-clearance for treatment of the following:Wrinkles Around the Eye (periorbital wrinkles)Age and Sun Spots (pigmented lesions)Brown Spots /Pregnancy Mask (Melasma)Acne Scars and Surgical ScarsSkin Resurfacing

Q3.How many treatments will I need and how will they be spaced?

Everyone’s skin is different I, but clinical studies suggest that for most people , maximum results are realized in just 3 to 5 sessions. They are usually spaced 4 to 6 weeks apart.

Q4. Does Fractional treatment hurt?

Topical anesthesia is applied before the procedure and cold air is used on the treatment area during the procedure to minimize discomfort.After the treatment, most patients report a feeling similar to having gotten too much sun. It usually disappears after 1 to 3 hours.

Q5. What side-effects can I expect after treatment and how long will they last? You will have some degree of redness and swelling. The intensity and duration depends on how aggressive the treatment was and your particular healing characteristics. Other temporary side-effects may include minor itching, dry skin, peeling or flaking, and a bronzed skin appearance. You will be given specific instructions about what to expect for your particular treatment and how to minimize the side-effects.

Q6.What precautions should I take after treatment? Wear sunscreen of SPF 30 or higher and avoid direct sun exposure while you’re healing for at least 3 months after your last treatment .Further protect yourself by wearing wide-brimmed hats if you expect to be out in sun.

Q7.How long do the effects of Fractional treatment last? It depends on your particular condition and how you care for your skin. Once your skin is restored, continue to protect it as described above. For conditions, such as melasma, it is very important to avoid direct sun exposure. Your physician will give you specific advice based on your individual needs. Find out how Fractional treatment can help you look as good as you feel. Fractional treatment can work wonders, but the first step is up to you. Lives too short…look as good as you feel-ask your physician today for more details about the benefits Fractional treatment can deliver for you.

Packaging & Shipping

Our Services

Main Technical Parameters:

Laser wavelength: 10.6µm

Laser unit:TEM00 module Co2 unit (best quality for the facula)

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm

Pulse width: the minimum pulse width is 0.1ms