Led Light Skin Therapy 3 In 1 PDT LED Focus Light RF Vacuum Infrared Microdermabrasion Skin Rejuvenation Equipment 470nm Red
USD $1 - $4,000 /Set
Min.Order:1 Set
SUS Advancing Technology Co., Limited
Applications:
Acne caused by inflammation.
Dilated pore, fine wrinkle, relaxation of the skin and improve the tone of the skin.
Pigments such as freckle, sunburn, age pigment etc.
Prompt the recovery of the injured skin (such as burn, water blister, pigmentation etc caused by too much energy effected on the skin during the treatment of photorejuvenation).
3 in 1 PDT LED focus light RF Vacuum infrared microdermabrasion skin rejuvenation equipment
The Science behind NoTox
VS 20:
Microdermabrasion:
Microdermabrasion is equipped with wands of varying sizes and coarseness, suitable for different skin surfaces and individual requirements. The wand tips have real diamond chips that resurface and remove dead skin cells. Afterwards, these dead cells are sucked back into waste filter. The diamond tips can be more conveniently controlled, are more effective and cause minimal skin irritation. Microdermabrasion and LED go hand in hand when treating for new.
35° focused LED
LED skin rejuvenation is the interaction of light, delivered through Light Emitting Diodes(LEDs), to activate cell receptors causing them to produce collagen or multiply.
LED is a new, cutting-edge technology that will reduce the appearance of the visible signs of skin ageing, naturally. This non-surgical light therapy helps to minimise visible fine lines and wrinkles by helping to naturally plump up the skin.
In simple term, led is a deeper massage to stimulate the layers of the skin that
therapists's hands can't reach. It works to help plump up skin naturally- similar to how photosynthesis works in plants.
This light energises, rejuvenates and repairs damaged skin, while naturally boosting your body's own production of collagen.
The treatment leaves you with younger, smoother, plumper looking skin. Led light also accelerates wound healing with an associated reduction of scarring for
problematic acne conditions or for post-operative recovery of the skin.
35° focused LED's advantages over common 120° LED
Most led light produce a beam of light that is at least 120 degrees. This means that a large percentage of the available light energy is lost and does not hit the treatment area of the skin.
The BL001 uses 1260 high powered, focused LED. These high quality LED's from Japan focus the light at 35 degrees meaning that almost 100% of the power is delivered to the treatment area which helps to stimulate collage, speed up the cell renewal rate by 150% and prevent acne from reoccurring.
This allows us to use lower power LED's which make the treatment much more comfortable for your client.
Features of focused LED About product quality:
All of our machine have CE, ISO, and NQA certificate. Besides, we have a team of QC to control and inspect every single machine is in perfect condition before delivery. Because we fully understand that it will be a great trouble if machine have any problems during working at oversea.
Purity
Focused LED delivers pure, narrow-band light via a matrix of LED's, carefully positioned to ensure a uniform beam. The activation of photoacceptors is achieved with non-thermal light with no subdermal insult or damage to the tissue as seen with other light sources. The scientifically designed, patent-protected light source does not produce any harmful UVA or UVB.
Specificity
Focused led has been developed to closely match key photoacceptors, excluding all unnecessary wavelengths and delivering a continuous dosage at the optimal power. There is no photobeaching, sebaceous gland disruption or tissue hyperthermia as seen with high intensity light sources and lasers.
Applications
*Anti ageing, wrinkle reduction;
*Resurface and remove dead skin cells;
*Suitable for mild to moderate inflammatory acne to reduce scarring;
*Accelerate recovery for post- operative procedures;
*Boost collagen production;
*Imporve skin tone and texture;
*Encourage lasting hydration in the skin;
*Prolong the effects of botos and other dermal fillers.
Features:
1.Simple operating interface
The NOTOX has minimal settings which let you set up and start treating in a matter seconds. No supervision required means you can set and forget attend to other patients or clean up from your last treatment.
2.Specific wavelength led
The NOTOX has 1260 fixed wavelength, high powered, focused led's. We manufactureour led's at 420nm, 633nm, 830nm which means they are the perfect wavelength for treating specific conditions. Any wavelengths outside these parameters will simply not have any positive effect on our skin.
3.Choice of treatment heads
Choose between a red head(633nm), red/ infrared head(633nm/830nm) or blue head(420nm).
Additional heads can be purchased for a small extra fee and can be swapped onto your machine so you can offer a number of treatments.
4. Low maintenance costs
Led is low cost process for a operator. The Led themselves are good for over 200,000 hours and draw minimal power. There are no consumables required, though a mild photosensitiser can add to the short-term result.
How long
Specifications
1.PDT LED photodynamic
2.7 colors photon wave
3.skin rejuvenation ,wrinkle remove
4.factory price
Treatments are typically 45 minute appointment for microdermabrasion, focused led alone and VS20 one by one. Microdermabrasion 15 minutes, focused LED 20 minutes, and VS20 10 minutes are usually suggested.
Technical parameters
Operating screen | 8 touch screen |
RF Frequency | 10Mhz |
RF power | 45 J/cm^2 |
Vacuum power | <=100 kpa |
Vacuum mode | Pulse |
Led wavelength | 633nm red |
Led beam angle | 35° |
Light power | 1-10 levels |
Continuous operating time | 10-12 hours |
Life of leds | 200,000 hours |
Microdermabrasion | 3 wands and 9 tips at varies size |
Weight | 30kg |
Warranty | 1 year |
About us:
SUS Advancing Technology Co.,Ltd is a global developer, manufacturer and provider of laser, light-based, radio frequency and ultrasound devices of aesthetic and medical applications. SUS have been at the forefront of innovative systems designed to meet the unique needs of today's practitioners. SUS's mission is to provide modular, cost-effective and high-performance systems that enable practitioners to confidently offer safe, effective and profitable aesthetic treatments to their patients. Born and work for beauty & slim machine.
----------------------------------------------Exhibtion & Fair----------------------------------------------------------------------
Annually Exhibited:
1. Cosmoprof Bologna Italy - March
2. Beauty Vision Poland - April
3. Turkish Beauty Eurasia - June
4. Cosmoprof North America-July
5. Cosmoprof Asia HongKong- November
6. 20th InterCHARM Exhibition in Russia
7. 2015 Cosmoprof-Italy
---------------------------------------Questions&Answers---------------------------------------------------------------
1. About product qualit
All of our machine have CE, ISO, and NQA certificate. Besides, we have a team of QC to control and inspect every single machine is in perfect condition before delivery. Because we fully understand that it will be a great trouble if machine have any problems during working at oversea.
2. About warranty:
1. Online customer service: customer can contact each Suslaser staff online if they meet any questions, and our staff will help to judge the situation and give our advises. Most problems will be solved at this stage.
2. Engineer Judgement: If our customer service do not work, our engineers will give their pinpoint solution to each case.
3. Warranty: Up to 12 months for repairing or replacement. During warranty period, customer will enjoy free repairing parts or necessarily replacement due to material and workmenship problem. But any men-made or inappropriate conduct damage will be excluded.
3.About instruction and usage:
We can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensure you whatever problem and whenever you meet, you can solve easily.
4. About Shipping & Freight:
For more options of our customers, Suslaser only give the Exw price, which factory price without shipping. But if you need, we can provide door to door express and assist to send machines by carrier, like DHL, FedEx, EMS, TNT, etc with prepay freight cost or collective account. Customer also can let your shipping agent to contact us, and we suslaser will do our best to cooperate with them.
5. About Customization:
If customer have any needs of customization or OEM service, please contact our staff for more information. For appearence change, like Logo, operating system background, outlook adding, print, language, it would be easy to achieve. For technology change, like PDT with two applicators, Lipo laser combined with cavitation, please contact us for more support.
6. About distributing:
Suslaser cherish every chance to cooperate with every distributors or willing to assist buyer develop into a local distributors. Distributors will enjoy more supports from us, regarding of price terms, technical support, customization, technical cooperation, exclusive policies, etc.
For more information, please feel free to contact us!!
Treatment scope of led light therapy machine:
1>Effective anti aging
2>Eradicate fleck without pigmentation
3> skin rejuvenation, wrinkles removing, face lifting
4> cure desensitization, red nose, rid acne and telangiectasia
5> heal up the injured surface after the plastic and surgery
6> repair the sensitive skin due to tattoos, the injured skin caused by the laser or photons surgery and rid pigmentation
7>instantly remove the tiredness, relax the body, and ameliorate the dormancy
Regulate incretion, ovary care
8>absolutely ameliorate nerve coma on the face and convulsion