Ultrasonic Contour 3 In 1 Slimming Device Newest Products Criolipolisys Machine Vacuum Cavitation Lipo Machine Cavitation With Lipo Laser Machine
USD $4,500 - $5,500 /Set
Min.Order:1 Set
Guangzhou OSANO Beauty Equipment Co., Ltd.
Advantage
1. Non-anetsthasia ,no side effects
2. Good effect and no rebounding phenomenon
3. No blooding,tumidness and bruise
4. Woundless,no influence on normal working and living
Newest products criolipolisys machine vacuum cavitation with lipo laser machine
Advantages of LM-S800C
1. Five different Functions in one product
2. A process of Weight loss, Fat removal, face lifting, body slimming, body contouring and shape keeping can be achieved by LM-S800C
4. Tightening slack skin
5. Non- surgeries treatment that has not risks of blood loss and minimal bruising
6. Pain-Free
7. Factory Price
8. One year Warranty
9. After using cyolipolysis treatment, slack skin can be lifting by using RF roller. Sixpolar rf is to tighten skin by stimulating collagen.
10.5 in 1
Parameter:
Screens | 8 inch & 3.5 inch TFT truecolor handle touch screen |
Sixtupolar RF frequency | 5 Mhz |
Cavitation frequency | 35~40 Khz |
Cryo temperature | -5℃~5 ℃ |
Max vacuum pressure | 200-780mmHg |
Red Led light wavelength | 700nm |
Cryo Handle size | M(No Touch screen) |
Vacuum rf roller handle size | L(With Screen) |
Diode laser lamp wave | 650 nm |
Big laser paddle | 10 lamp/pcs, 8 pcs |
Small laser paddle | 2 lamp/pcs, 4pcs |
Power | 500 W |
Cryotherapy (fat freezing treatment) is a non-invasive (without contact) procedure in which doctors place a small suction cup on a patient's skin. The device gradually extracts body heat until the subcutaneous fat is frozen. During the procedure, the epidermis remains within a normal temperature range, which leaves the skin undamaged.
Clinical trials have shown no side effects and the procedure is painless and results are impressive. After the first session, fat deposits are reduced by 25 percent.
One procedure is likely to be enough for most patients, but manufacturers do not rule out the need for additional sessions, depending on the amount of fat a patient wants to lose.
In the machine, a specially designed cooling applicator is applied to the desired area of fat reduction to extract energy (cooling) from the underlying fat tissue without damage to other tissues. The applicator cup uses a gentle vacuum pressure to draw the tissue between the cooling panels. During the procedure, the applicator delivers precisely controlled cooling conditions that have been proven to target and eliminate fat cells in specific areas of the body. When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer.
Radio Ferquency (Roller and Sixpolar) + Cavitation+Lipo Laser (8 paddles and 4 small paddles)+Cryo
Notice: Ultrasound handle and Sixtupolar RF handle should be used with gel.
Velashape combines with four dimensions - radio frequency, infrared lights , roller massages and vacuum. By using heating up, squashing and fat cells metabolism, eliminating sizes of treatment areas can be achieved. In the mean while, maintaining skin surface is to be more smooth and tightening than ever.
RF (Radio Frequency)
It is referred to as a high frequency AC change of electromagnetic waves.Change of more than 10,000 times a second is called high-frequency current, while the RF is such a high frequency current. When RF waves penetrate the skin, it causes collagen fiber to heat up to 45 °C -65 °C, the collagen fibers immediately contract, so that the loose skin wrinkles are stretched by the stimulation of dermal collagen hyperplasia gradually promote cellular rejuvenation,so as to achieve the purposes of firming and reducing wrinkles.
Cavitation is the latest technology in slimming.
Powerful shock wave head emits frequency of 40KHZ ultrasound waves into the human body. Which penetrates into human fat cells causes vibration impacts and movement in the fat cells and in turn can effectively burn calories, reduce water retention in fatty tissues, and causes the fat cells to shrink. In addition, the strong acoustic vibration that causes cells to produce a strong vibration impact, cause fatty cells to bust instantaneous,thus reducing fatty cell numbers cells, allowing the removal of the fatty cells.
Notice: Cavitation and Sixpolar RF should appy ultrasonic oil or gel on its treatment heads.
Lipo Laser is a treatment that adopts Laser light to stimulate activities under skin.
Laser liposuction deliveries a wave of laser light into cellular tissue. The wave can tighten skin over subsequent months, stimulating collagen production. The energy and heat from the laser also have a function of destroying fat cells membrane, then cytoplasm inside the fat cells leaks out after membrane destroyed, and materials inside fat cells will leave from body by body metabolism.
Lipo Laser achieves a process of Weight loss and Skin lifting, which reaches aim of body contouring.The energy and heat from laser which have effect on blood capillaries will widen blood capillaries,
then improve blood circulation in short time. It can increase the speed of metabolism.
8 Big paddles and 4 Small paddles
Cryolipolyse handle consists of two freeze pads, infrared light and vacuum holes. By using low temperatures between -5 ℃ to 5℃ it deliveries cool degree temperature into fat tissue to achieve freezing fat cells. Fat cells which get frozen and destroyed turn in solid. When treatment done, the temperature of targeted fat part returns normal. Skin tissue which is protected by antifreeze membrane is intact but fat cells without protections are destroyed during doing treatment. Liquids inside fat cells leak out and leak into body fluids participating body metabolism.
The result of Cryolipolyse treatment will be seen after 2-4 months. The influence of treatment will last up to 6 months. Therefore, the finalized result generally will be seen after 6 months but it still depends on different metabolism of different people. For better result, balanced diet, enough rest and daily exercises are still essential, which have influences on body metabolism.
Notice: For avoiding frostbite, freezing part must use antifreeze membrane.
About us
Founded in 2006, Guangzhou OSANO Technology Co., Ltd is china beauty machine and health equipment manufacturer which has its own research & development, production, quality control, sales and service departments.
Currently, our main product line for slimming machine,slimming equipment ,skin care,skin tightening includes cryolipolyse machine, laser slimming machine, ipl hair removal machine,cavitation machines, RF machines, vacuum machines, paraffin & depilation machines, manicure & pedicure machines, multifunctional beauty machines, etc, which are widely recognized for their high quality, reliable performance and unique design.
We highly concern about your satisfaction to our product-quality and business-service.
Why Choose Us
Our company has strong technical research and development capability, and can offer OEM & ODM service for clients. Most of our products have got CE certificate and have been exported to Europe, America, South America, Australia and so on, owning high reputation among our customers from all over the world.
We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients.
Certifications
Cosmoprof Bologna In March,2016
We have two website:
Company website:
Alibaba website: http://osano.en.china.cn
http://bodyslimming.en.china.cnMy email:sales04(at)
Skype:osano66
Features
1. The entire process is completed without the need of surgery and anesthesia.
2. Does not cause the phenomenon of uneven skin.
3. Does not cause the phenomenon of bleeding,swelling and blood stasis.
4. Without side effects and the risk of gaining the weight back, the results are rather obvious.
Tel:+86 159 2057 2612
Send Your Inquiry Details In The Below ,click "Send" Now
Our service :
Professional manufacture with 13 years experience, master the most Advantage technologies of medical beauty equipment.
Professional R & D team, supply OEM & ODM service.
3 years warranty, lifetime free service and maintenance.
Fastest delivery time, we promise arrange delivery within 5 working days.
Professional service team, supply 24 hours online service.