Lipo slim cavite machine cavitation vacuum machine cavitation and radiofrequency 

Parameter

1.Cryo handle Light wavelength: 492 - 455nm

2.Voltage:220V/50Hz or 110V/50Hz or 110V/60Hz;

3.Touch Screen:8 inch True color touch screen;

4. Power Consumption: ≤400W;

5.

Cryotherapy (fat freezing treatment) is a non-invasive (without contact) procedure in which doctors place a small suction cup on a patient's skin. The device gradually extracts body heat until the subcutaneous fat is frozen. During the procedure, the epidermis remains within a normal temperature range, which leaves the skin undamaged.

Clinical trials have shown no side effects and the procedure is painless and results are impressive. After the first session, fat deposits are reduced by 25 percent.

One procedure is likely to be enough for most patients, but manufacturers do not rule out the need for additional sessions, depending on the amount of fat a patient wants to lose.

In the machine, a specially designed cooling applicator is applied to the desired area of fat reduction to extract energy (cooling) from the underlying fat tissue without damage to other tissues. The applicator cup uses a gentle vacuum pressure to draw the tissue between the cooling panels. During the procedure, the applicator delivers precisely controlled cooling conditions that have been proven to target and eliminate fat cells in specific areas of the body. When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer.

6. RF frequency:   5Mhz

7. Cavitation frequency: 35~40K hz

8. Cooling device output pressure: 0-100Kpa

9. Cooling liquid: pure water, with 4litres

10. Default working time: 1-60 minutes

11. Fuse size: F3AL250V

12. Relative Humidity: 85%

13. Atmospheric pressure:88KPa ~110KPa   

14. Laser wave length:  diode laser 635-650nm

15. Maximum output power of laser part:  52W

16. Laser intensity:

   3.0W/CM2(Belly),3.6W/CM2(Thigh),2.4W/CM2(Arm),1.5W/CM2(Face)

Accessories

1. Fat freezing handle: 1 pcs

2. Cavitation heads:     1 pcs

3. Sextupole RF head:  1 pcs

4. Lipo laser pads:  12  pcs; 4 pads small(1 lamp/ pad); 8 pads big(8 lamp/ pad)

  Sextupole

Cavitation head

40kHz focused ultrasound cavitation effect, to cause tons of microscopic air bubbles to surround the lipocyte (fat cell) membranes and with its resonant frequency, the bubbles cause a high enough pressure to cause the fat cells to break up instantly.
The broken lipocytes are then moved to the liver and safely metabolized out of human body which is assisted by drinking a lot of water.
It produces lipolysis of fatty acids from adipocytes (fat-laden cells) due to a phenomenon known as stable cavitation, and increased cell permeability of the adipocytes. You get an increased flow of triglycerides. Furthermore, there is a breakdown of the fibers through mechanical action (jet stream). Finally, some content of adipocytes is metabolized by the liver and eliminated in the urine

New Fat freezing handle,   our cryolipolysis heads is transparent, when doing treatment patient can see how the treatment going, patient can see how much the fat is absorpted by the handle, many clients like this design.

Advantage

1. Non-anetsthasia ,no side effects

2. Good effect and no rebounding phenomenon

3. No blooding,tumidness and bruise

4. Woundless,no influence on normal working and living

The default  treatment time is 30 minutes, the maximal  treatment time is 90 minutes, because our treatment temperature  is accurate, the error will not exceed  1 °C, and machine temperature is 5°C ~ -5°C, so in order to avoid  frostbite when patient do teratment, please inform them need to control well the treatment time and temperature according to their own physical qualifications.

Lipo laser pads

lipo laser working theory

I lipo laser for fat reduction, use the 650nm soft diode laser to destroy the deep fat cells, broke 

the cell membrane, change the fat to triglyceride, then leave out the body, thanks to metabolism. 

The I lipo laser heat can Stimulate the subcutaneous dermal tissue collagen and elastic fibers 

hyperplasia, make the treated area skin tighten and elasticity

Safe and Painless

Lipo Laser uses low levels of visible red laser light to create a safe and painless bio-stimulation 

effect in the targeted fat tissue. This stimulation is of the normal chemical pathways which the body 

uses to free up energy resources when required, so Lipo laser does not produce any abnormal 

effects in the body or damage body tissue such as cells, blood vessels or neighboring nerves or 

vital organs. 

 The treatment can be performed on all skin types and body areas where unwanted fat is stored and 

you can return to normal activity immediately after treatment.

Application

Intensive physicallipolysis to remove fat

Excess fat cell melted

Body slimming,cellulite reduction

Smooth fatigue

Remove obstruction from channels and collaterals

Promote and accelerate the body’s metabolism 

 We have 7 years experience in beauty equipment industrial, the interface, logo, language and machine color is optional, so welcome to OEM or ODM, as we are manufacturer we can as per your requirement to design the machine and we have received much good feedback from  our client, so we will be your better choice.

Our product including cryolipolysis, vacuum roller, cavitation, lipo laser, radio frequency, photon, ultrasound etc.

Welcome to visit our factory, or you can contact us. Phone & Whats APP: 086 134 3033 4237

Our office and factory view

Packing: Usaually, Outer package in Wooden case,  Inner package in PE foam, this packing way can protect the machine well, can avoid damaging during the delivery, but we can according to your requirement to chanange the packaing.

Delivery:

Q: Do you have any warranty?

A: Yes, we have. 12 months warranty on host machine, 3 months months free replacement warranty for handles, treatment heads, and parts.

Q: What’s the delivery time?
A: The machine will be sent out within 3-6 days after payment received

Q: What’s the payment method?
A: T/T(bank transfer) Western Union, Escrow, Paypal etc.

Q: How to do the maintenance when something goes wrong with the machine?

A: You just need take a video for us, our technician will guid you at the first time, within the maintain time, we will send you the accessories for free if needed, 24 hours calling service is available.