Microdermabrasion Vertical Water Oxygen Face Lift Jet Deep Facial Cleaning Machine
USD $1,111 - $5,999 /Set
Min.Order:1 Set
Beijing KES Biology Technology Co., Ltd.
Advantages:
New idea for skin rejuvenation, safe treatment with good result.
A vast range of applications; many in one machine.
Safe and effective for all skin types.
Friendly design, easy to operate.
Skin scan system involved, before after picture can be taken and displayed.
Air compressor inside, reserved oxygen bottle connection port makes two options available.
--emitting compressed air (using air compressor inside)
--emitting medical oxygen (connected with oxygen bottle when operating)
Water oxygen jet facial deep cleaning
Skin rejuvenation
MED-390
Water oxygen jet device/deep cleaning machine
1.Applications of Medical CE&FDA Approved Water Oxygen Jet Equipment for Ance Removal
1) Naturally Permanent Acne Treatment
2) Clinically proven to Anti-Hair Loss (Alopecia Seborrheica)
3) Deep Cleanses & Exfoliates
4) Skin moisturing and nutrient replenishing
5) Wrinkles & Pigmentation Reduction
6) Pores Shrinking
2.Contrast Photos (Before & After)
How it works?
It is a simple and effective superficial peel that helps rejuvenate the facial skin. It makes use of pressurized oxygen to accelerate a liquid agent (saline) to supersonic velocities, creating an exfoliative effect on the skin. The liquid agent (saline) is compounded with different vitamins and supplements that will address the problem of the patient. The high velocity, at the speed of 200m/s, peels the superficial layers of the skin allowing better penetration of the compounded substances, and prevents skin inflammation and infection by saline solution which is put out in spray. The anaerobic bacteria in the sebaceous glands cannot exist when oxygen is spray into the skin. At the mean time this system supply sufficient nutrition to the skin, accelerate the cell regrowth, subsequent reepithelialization takes place resulting in younger, healthier skin. Some apparatus have funtion of skin checking and photo saving. Banding with LED(Low Emitting Diode) patients will get quick and reliable skin regeneration result.
3. How it works?
Water and Oxygen Jet is an effective acne treatment system, which mixes the water, medical oxygen and nutrition liquid completely, and in a speed of 280m/s spray out and act on skin. The mixture penetrates epidermis into deep dermis with 10μm tiny granules and cleans the follicle and sebaceous gland completely. Water and Oxygen Jet machine deeply clean the skin, and is an effective treatment to clean skin allergen, demoded follicular, and follicle mite. Oxygen in the tiny granules can improve spO2 in derma, to improve skin metastasis. The tiny granules clean sebaceous gland completely while functions with germinal factor, which make water and oxygen jet machine to be the first choice for the treatment of alopecia seborrhea.
4. Unique Advantages of Medical CE&FDA Approved Water Oxygen Jet Equipment for Ance Removal
1) Needle tubing from America for the handpiece
2) Electronic display, more advanced than the normal mechanical pressure gauge
3) Say goodbye to the ugly" Medicine Flask any more " you will not see in our machine, it is equipped inside the machine
4) Unique highquality 5L stainless steel gas cylinders, ensure gas output clean, and you need not worry about its safety even under the situation of gas cylinders getting rust.
5.Technical Specifications of Medical CE&FDA Approved Water Oxygen Jet Equipment for Ance Removal
Input | Up to 680W |
Internal | Max.0.55MPa |
External | ≤0.55MPa |
Internal | 0-0.43MPa |
Jet | >280m/s |
Diameter | <40μm |
Negative | 318pc/cm3 |
Pump | 0.7MPa |
Pneumatic | 0.7MPa |
Pump | 85°C |
Stand-by | Continuously for 18 hours |
Electrical | 100-240VAC, 20A max., 50/60Hz |
Net | 38 kgs |
Dimensions | 58*45*100 cm |
6.Safe package with thick foam inside to avoid any damage from long time transportation!
ODM and OEM services are our specialty, and welcome to contact us!
Beijing KES Biology Technology Co., Ltd.
1.Our factory provide one-year warranty, and lifetime maintenance.
2.Our factory provide expert user manual, free training for operation of the machine in our factory, which provided by our specialized training department.
3.Our factory directly provide technical support, have strong skilled technique group and engineer team.
4.OEM/ODM services are available, we have our own developing and design department and manufacturing line, have the top technology in the market, which ensure your required beauty machine.