Vascular Lesions Removal New E-light 590-1200nm IPL +RF Armpit Hair Removal
USD $1 - $2,350 /Set
Min.Order:1 Set
Beijing KES Biology Technology Co., Ltd.
Applications:
Skin rejuvenation: pores refining, improve rough, dark and gloomy skin, restore skin elasticity
Pigment treatment: freckles, sun-burn spots, senile plaque, pigmentation spots
Hair removal: armpit, chest, lip, arms, legs, beard, bikini etc.
Vascular, spider angioma, acne rosacea
Acne: pimples, improve seborrheic oily skin and acne scars
Applications
750-1200nm: Hair Removal (Skin Type IV)
690-1200nm: Hair Removal (Skin Type III)
640-1200nm: Hair Removal (Skin Type I & II ) ; Wrinkle Removal
590-1200nm: Pigmentation and Vascularity; Skin Rejuvenation
560-1200nm: Vascular and Pigmented Lesions; Skin Rejuvenation
530-1200nm: Skin Rejuvenation; Superficial Vascular Lesions
IPL Instruction
When IPL irradiates the skin, light energy with particular wavelength will be selectively absorbed by melanin
of hair follicles .When the heated temperature of follicles reaches high enough their structures will be
damaged irreversibly, finally to achieve the effect of removing the unwanted hair.
480-1200nm: Light Pigmentation
430-1200nm: Acne
RF Treatment: Skin Tightening and Face Lifting
Contrast Photos (Before & After)
How it works?
E-Light is the perfect combination of MED-IPL technology with Bi-polar Radio Frequency (RF) and Skin Contact Cooling.
Radio Frequency is independent of melanin and thus independent of skin type. With Radio Frequency, increased selectivity and deeper dermal penetration would be achieved, thus lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. That is, less optical energy (IPL), when synergistically combined with Bi-polar RF, improves the safety factor when treating all skin types.
Meanwhile, contacting surface cooling technology applied on the treatment probe head can eliminate the heat effect attributed to optical energy, and increase the resistance of surface skin, reduce the RF absorption of the surface skin, greatly improving both the treatment performance and safety. The technology is equally applicable and effective to mild color target tissues.
Unique Advantages
1. Humanized handle design,easily carry!
2. Double counter system on handpiece and screen
3. Footswitch and Button switch =Safty+Convenience
Technical Specifications
Wavelength (Spectrum) | 430/530/640-1200nm (standard)480/560/590/690/750-1200nm (optional) |
Energy Density (Fluence) | 1-50J/cm2 |
RF Energy | Up to 50W |
Spot Size | 12x33mm² (standard)15x35mm²; 15x50mm² (optional) |
Pulse Repetition Rate How does it works?
IPL treatment is effective based on its selective absorbability. When the intense pulsed light penetrates the epidermis, the energy of light will be greatly absorbed by the pigments in epidermis. High energy and dark color skin will be with high risk in treatment. Moreover, majority of the heat is reflected andrefracted at the same time, only 30% to 40% of energy is utilizable. Therefore, it needs to increase the energy for a better treatment result. However, majority heat is absorbed by the pigments inepidermis, which directly block to use high energy for treatment, so that affects the single treatment result. | 0.2Hz; 1Hz |
Pulse Duration | 0.5-15ms |
Pulse Delay | 1-50ms |
Pulses | 1-10 pulses |
IPL Peak Power | 1200W |
RF Power | Max. 100W |
Cooling | Continuous Crystal contact cooling (-4°C~4°C ) + Air cooling + Closed water circulation cooling |
Stand-by Working | Continuously for 12 hours |
Display | 7" True Color LCD Touch Screen |
Electrical Requirements | 100-240VAC, 20A max., 50/60Hz |
Net Weight | 24 kgs |
Dimensions (WxDxH) | 60*46*34cm |
We have 12 months warranty, and on-line service is always available
* OEM and ODM services are our specialty, and welcome to contact us!
The principle of IPL
Applying the technique of IPL and Bipolar Radio Frequency,the equipment acts on the entire skin corium and connective tissue,stimulates the collagen of different depth to realing and grow,the gets treatment effect.Biopolar RF release energy at the same time,with the selective absorbtion for the skin to light energy,various pathological tissues of corium and epidermis creates photothermolysis effect.Since light energy is far below conventional IPL,the pigment tissue and vascular pathological tissue of the corium and epidermis would absorb more energy without injuring the epidermis,and then remove these pathological tissue better and get the effect.