1.J-STYLE  Vacuum Microdermabrasion machine for  diamond microdermabrasion and machine microdermabrasion

Quick introduction:

Easy to assemble and use

Improve the accumulation of aging, rough skin

Refine fine lines &  wrinkles

Physical mechanical dermabrasion, can be easily controlled, no side effects, safe and reliable

Fast recovery

Four vacuum power to choose

2.Packaging for J-STYLE Vacuum Microdermabrasion machine for  diamond microdermabrasion and machine microdermabrasion

Hard giftbox package with foam mould provides a solid protector, to fasten device firmly without any harm from external environment.

3.Treatment steps for J-STYLE Vacuum Microdermabrasion machine for  diamond microdermabrasion and machine microdermabrasion

(1) Facial Treatment Routine

• Wash and dry your face

• Remove the handle from the charging base and fit your choice of diamond tip with a new black wool filter.

• Press and hold the power button for 2 seconds to turn the unit on. Press as required to increase the power level, as indicated by the LEDs. It is recommended to    start on level 1 for the first treatment and to progress to a higher level if comfortable. See also MAX recommended levels in the above diagrams

• Place the diamond tip flat against the skin until you feel suction then move it slowly across the surface of the skin in a smooth motion, covering the same area no more than 2-3 times in one treatment. Do not press hard. In some areas it can help to hold the skin taught with the other hand (eg. around the eyes).

• The diagrams will help you establish an effective facial routine as below.

(2) After treatment

• Press and hold the power button for 2-3 seconds to turn off device.

• Wash your face with cold water to remove any remaining dead skin cells and then apply your preferred moisturizer. NOTE: Avoid using AHA (acid based) moisturisers on the day of treatment

• Depending on your skin type, you may experience some reddening or increased sensitivity after treatment. This is perfectly normal and usually subsides within a few hours.

• Avoid direct sun exposure after treatment, consider applying a stronger sunscreen as required.

• Always, dispose of the used black wool filter and replace with a new filter ready for next use.

• Remove dead skin cells and debris from the diamond tip using the brush provided. We also recommend the periodic use of an ultrasonic cleaner for deep cleaning the diamond tip, especially if it starts to feel smooth or less effective

(3) Other Treatments

Other areas of the body can also be treated 2-3 times a week. For example, neck, chest, hands etc. When treating larger areas, replace the black wool filter part

way through the treatment in order to maintain the level of suction. Aim to cover the same area no more than 2-3 times in one treatment. A body tip for wider coverage and a precision tip for targeting smaller problem areas, are both available separately from our website. 

4.FAQ for J-STYLE Vacuum Microdermabrasion machine for  diamond microdermabrasion and machine microdermabrasion

(1)How often should I use the product?

It’s best to start slowly – usually just once a week, then build up to 2 or 3 times a week if this is comfortable for your skin.

(2)Will it hurt?

No. Treatment should not be painful. Depending on the sensitivity of your skin,you may feel slight discomfort from the diamond tip as it moves across the skin and there could be some short term redness or sensitivity after treatment, but this will soon subside. If treatment is uncomfortable, then you may need to use a lower power setting or switch to the sensitive diamond tip.

(3)Can I use the product in combination with anti-aging creams/serums?

If your anti-aging cream or serum contains AHA (or acid) then it should not be used on the same day as the microdermabrasion treatment, but can be used on non-treatment days. Non-AHA (acid free) anti-aging products can be used at any time.

(4)The product seems to be losing power

This can happen if the black wool filter is not replaced after each treatment. Try fitting a new filter. Also check the tip to ensure that the plastic part of the tip has no cracks or damage. Check that the two rubber o-rings are in place on the nozzle end of the unit (where the tip fits over).

(5)The diamond tip no longer seems rough

The diamond tip can accumulate skin cells over time which may start to make it feel smooth and reduce its effectiveness. If this happens we recommend cleaning the diamond tip in an Ultrasonic Cleaner. These are either available to purchase,or jewelry stores offer a cleaning service. If using the product regularly you may need to do this several times a year to maintain optimum effectiveness.

5.Different tips for J-STYLE Vacuum Microdermabrasion machine for  diamond microdermabrasion and machine microdermabrasion

Four different diamond tips for different body skin type and parts: Normal tip for normal skin;sensitive tip for sensitive skin; precision tip for skin corner and body tip for neck ,arm and other parts.

6.About US and certifications:

2.We own moulding and plastic injection workshop,SMT,PCBA,silk printing and painting spray through all production stage, which enable us to guarantee total customer satifaction.  Thanks to our strong R&D support from Japan, we welcome all customized orders, and OEM and ODM projects. 

Product certificates:

Strategic Partner: