wire wound noninductive resistor
USD $0.01 - $1 /Piece
Min.Order:1000 Pieces
Shenzhen Pak Heng Electronics Co., Ltd.
wire wound noninductive resistor
Wirewound Noninductive Resistors(NKN)
Features:
1,Good heat-durability,low temperature coefficient, low noise, high overload power.
2, Operating ambient temperature:-55 to +275.
3,Surface is nonflammable,the 1/4-6W coating is gray white and indicate the resistance value by color ring, indicate a green ring at the behind of the precision color ring, the 7W or over will indicate the resistance value by lettering and coating is green.
4,Resistance tolerance: ±1%, ±2%,±5%,±10%.
Performance Test:
Test Item Test Condition Performance
Temperature coefficient ±300ppm/
Short time overload R≤±(2%R0+0.05R)
Pulse overload R≤±(1%R0+0.05R)
Resistance to soldering heat R≤±(1% R0+0.05R)
Solerability The soldering area is over 95%
Temperature cycling R≤±(1% R0+0.05R)
Load life in humidity R≤±(5% R0+0.05R)
Load life in heat R≤±(5% R0+0.05R)
Nonflammability No visible flame
wire wound noninductive resistor
Dimensions and Voltage Performance:
Part No. | Power |
Resistance range | Dimensions |
Max. working voltage |
Max.overload voltage |
Max.insulation voltage | ||
L±1 | D±0.5 | d±0.05 | ||||||
NKN012 | 1/2W | 0R1-10R | 9.0 | 3.2 | 0.58 | 150V | 400V | 250V |
NKN01B | 1W | 0R1-10R | 9.0 | 3.2 | 0.75 | 150V | 400V | 250V |
NKN02B | 2W | 0R1-12R | 11.0 | 4.5 | 0.75 | 150V | 400V | 350V |
NKN03B | 3W | 0R1-22R | 15.0 | 5.0 | 0.75 | 350V | 600V | 500V |
NKN04B | 4W | 0R1-33R | 17.0 | 6.0 | 0.75 | 350V | 600V | 500V |
NKN05B | 5W | 0R1-33R | 17.0 | 6.0 | 0.75 | 350V | 600V | 500V |
NKN06B | 6W | 0R1-47R | 25.0 | 8.0 | 0.75 | 500V | 600V | 750V |
NKN07B | 7W | 0R1-56R | 31.0 | 8.0 | 0.75 | 500V | 600V | 750V |
NKN08B | 8W | 0R2-62R | 41.0 | 8.0 | 0.75 | 500V | 600V | 750V |
NKN09B | 9W | 0R3-100R | 52.0 | 8.0 | 0.75 | 750V | 800V | 1000V |
NKN10B | 10W | 0R3-100R | 52.0 | 8.0 | 0.75 | 750V | 800V | 1000V |
Performance Test:
Test Item | Test Condition | Performance |
Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100℃,calculate per℃ resistance value change rate . | ±300ppm/℃ |
Short time overload | 1/2~4W:According 5 times rated voltage, 5~10W:According 10 times rated power to account the voltage or Max.overload voltage (get the lower) for 5 seconds. | ΔR≤±(2%R0+0.05Ω) |
Pulse overload | At 4 × rated voltage or Max. pulse overload voltage (get the lower) cycle 10000±200 times(1 second on, 25 seconds off ). | ΔR≤±(1%R0+0.05Ω) |
Resistance to soldering heat |
Immerge into 350±10℃ tin stove for 2~3 seconds. | ΔR≤±(1%R0+0.05Ω) |
Solderability |
Immerge into 245±3℃ tin stove for 2~3 seconds. | The area of soldering is over 95% |
Temperature cycling | At -55℃ for 30 min, then at +25℃ for 10~15 min, then at +125℃ for 30 min, then at +25℃ for 10~15 min, total 5 cycles. | ΔR≤±(1%R0+0.05Ω) |
Load life in humidity | Overload rated voltage or ing voltage (get the lower) for 1000 hours (1.5 hours on and half-hour off ) at the 40±2℃ and 90~95% relative humidity. | ΔR≤±(5%R0+0.05Ω) |
Load life in heat | Overload rated voltage or ing voltage (get the lower ) for 1000 hours (1.5 hours on and half-hour off) at the 70±2℃. | ΔR≤±(5%R0+0.05Ω) |
Nonflammability | Respectively load AC voltage by 5,10,16 times rared power for 5 minutes. | No visible flame |
NKN | 01B | J | 0 | T520 | 100R0 |
Product Name |
Power |
Tol. |
Special Code |
Forming |
Ohm |
Wirewound Noninductive Resistors
| 014=1/4W 012=1/2W 01B=1W 02B=2W 03B=3W 04B=4W 05B=5W 06B=6W 07B=7W 08B=8W 09B=9W 10B=10W | F=±1% G=±2% J=±5% K=±10% |
| T520=T52 T710=T71 M001=M F001=F B001=B
| 0R100=0.1Ω 0R220=0.22Ω 10R00=10Ω 100R0=100Ω
|
wire wound noninductive resistor