100R 10K Ohm 1/8 Watt Nonflammable Carbon Fixed Thin Film Resistors
Negotiable /Piece
Min.Order:5000 Pieces
Shenzhen Pak Heng Electronics Co., Ltd.
100R 10K Ohm 1/8 Watt Nonflammable Carbon Fixed Thin Film Resistors
Nonflammable Carbon Film Resistors(LCR/HCR/LCC/HCC)
Features:
1,Stable performance, extensive resistance, small size, high operating temperature and high ultimate voltage.
2, Highly adaptive pulse load, good high frequency performance
3, Operating ambient temperature:-55 to +125.
4, The surface is nonflammable, the normal size coating is brick red and the small size coating is green.
5, Resistance tolerance:±2%,±5%,±10%.
Performance Test:
Test Item Test Condition Performance
Temperature coefficient ±1000ppm/
Solerability The soldering area is over 95%
Temperature cycling R≤±(1% R0+0.05R)
Load life in humidity R≤±(5% R0+0.05R)
Load life in heat R≤±(5% R0+0.05R)
Nonflammability No visible flamme
Dimensions and Voltage Performance:
Part No. | Power | Resistance range | Dimensions(mm) | ing voltage | Max.overload voltage | Max.Pulse voltage | Max.insulation voltage | ||
L±1 | D±0.5 | d±0.05 | |||||||
HCC016 HCR016 | 1/6W | 0R~22M | 3.5 | 1.7 | 0.41 | 200V | 400V | 500V | 220V |
LCC14S LCR14S | 1/4WS | 0R~22M | 3.5 | 1.7 | 0.41 | 200V | 400V | 500V | 220V |
HCC014 HCR014 | 1/4W | 0R~22M | 6.0 | 2.3 | 0.45 | 250V | 500V | 750V | 300V |
0.52 | |||||||||
LCC12S LCR12S | 1/2WS | 0R1~22M | 6.0 | 2.3 | 0.45 | 250V | 500V | 750V | 300V |
0.52 | |||||||||
HCR012 | 1/2W | 0R1~22M | 9.0 | 3.2 | 0.58 | 350V | 700V | 1000V | 500V |
LCR01S | 1WS | 0R1~22M | 9.0 | 3.2 | 0.58 | 350V | 700V | 1000V | 500V |
HCR01B | 1W | 0R1~22M | 11.0 | 4.5 | 0.75 | 500V | 1000V | 1000V | 710V |
LCR02S | 2WS | 0R1~22M | 11.0 | 4.5 | 0.75 | 500V | 1000V | 1000V | 710V |
HCR02B | 2W | 0R1~22M | 15.0 | 5.0 | 0.75 | 500V | 1000V | 1000V | 710V |
LCR03S | 3WS | 0R1~22M | 15.0 | 5.0 | 0.75 | 500V | 1000V | 1000V | 710V |
HCR03B | 3W | 0R1~22M | 24.0 | 8.0 | 0.75 | 700V | 1200V | 1200V | 1000V |
LCR05S | 5WS | 0R1~22M | 24.0 | 8.0 | 0.75 | 700V | 1200V | 1200V | 1000V |
Performance Test:
Test Item | Test Condition | Performance |
Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100℃,calculate per℃ resistance value change rate . | ±1000ppm/℃ |
Short time overload | 2.5 × rated voltage or Max.overload voltage (get the lower) for 5 seconds. | ΔR≤±(1%R0+0.05Ω) |
Pulse overload | At 4 × rated voltage or Max. pulse overload voltage (get the lower) cycle 10000±200 times(1 second on, 25 seconds off ). | ΔR≤±(2%R0+0.05Ω) |
Resistance to soldering heat |
Immerge into 350±10℃ tin stove for 2~3 seconds. | ΔR≤±(1%R0+0.05Ω) |
Solderability | Immerge into 245±3℃ tin stove for 2~3 seconds. |
The area of soldering is over 95% |
Temperature cycling | At -55℃ for 30 min, then at +25℃ for 10~15 min, then at +125℃ for 30 min, then at +25℃ for 10~15 min, total 5 cycles. | ΔR≤±(1%R0+0.05Ω) |
Load life in humidity | Overload rated voltage or ing voltage (get the lower) for 1000 hours (1.5 hours on and half-hour off ) at the 40±2℃ and 90~95% relative humidity. | ΔR≤±(5%R0+0.05Ω) |
Load life in heat | Overload rated voltage or ing voltage (get the lower ) for 1000 hours (1.5 hours on and half-hour off) at the 70±2℃. | ΔR≤±(5%R0+0.05Ω) |
Nonflammability | Respectively load AC voltage by 5,10,16 times rared power for 5 minutes. |
No visible flame |
Part No.Regulation:
LCR | 01B | J | 0 | T520 | 100K0 |
Product Name |
Power |
Tol. |
Special Code |
Forming |
Ohm |
Nonflammable Carbon Film Resistors | 016=1/8W 14S=1/4WS 12S=1/2WS 01S=1WS 02S=2WS 03S=3WS 05S=5WS 016=1/6W 014=1/4W 012=1/2W 01B=1W 02B=2W 03B=3W
| G=±2% J=±5% K=±10% |
| T260=T26 T520=T52 T710=T71 M001=M F001=F B001=B
| 0R100=0.1Ω 0R220=0.22Ω 10R00=10Ω 10K00=10KΩ 1M000=1MΩ
|
LCR=Green,Copper wire HCR=Brick Red,Copper wire LCC=Green, CP wire HCC=Brick Red, CP wire |