Aluminum Housed Wirewound Resistors, description about 6 ohm 50 watt 80R 100R 500R 650R Ohm Aluminum Wirewound Resistor on China Suppliers Mobile

Product Details

Hot Sale Products

Cement Resistor

Company Profile

Certifications

Boat Type 6 ohm 50 watt 80R 100R 500R 650R Ohm Aluminum Wirewound Resistor

Boat Type Aluminum Housed Wirewound Resistors(CRX)

Features

1,Aluminum crust surface with good performance in heat radiation, suitable for cooling plate installation, can be used in the atrocious environment.

2,Small size, high power load.

3,High insulating capacity, encapsulation by non-flame inorganic Material, good performance in vibration

4,Multi connection form will be easily to fix.

5,Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.

6,Resistance tolerance:±1%, ±2% ±5%, ±10%

Power:50W,100W,150W

Tolerance: ±1%, ±2% ±5%, ±10%

Range:1R-100K

Description	Power	Tolerance	Range
LRX Gold Aluminum Housed Wire-wound Resistors	5W,10W,25W,30W,50W,75W,100W,150W,200W,300W,500W	±1% ±5% ±10%	1R-100K
TRX Trapezium Aluminum Housed Wire-wound Resistors	40W 60W 80W 100W 120W,150w,200w,300w,400w,500w,600w,800w,1000w	±1% ±5% ±10%	1R-100K
CRX Boat Type Aluminum Housed Wire-wound Resistors	50W 100W 150W	±1% ±5% ±10%	1R-100K

Specifications and Dimensions:

Performance Test:

Test Item	Test Condition	Performance
Temperature coefficient	Test the resistance value at normal temperature added 100℃,calculate per ℃ resistance value rate.	±300ppm/℃
Short time overload	According 10 times rated power to account the voltage or max .overload voltage (get the lower)for 5 seconds.	ΔR≤±(2%R₀+0.05Ω)
Resistance to soldering heat	Immerge into the 350±10℃ tin stove for 2~3 seconds.	ΔR≤±(1%R₀+0.05Ω)
Solderability	Immerge into the 260±5℃ tin stove for 2~3 seconds.	The area of soldering is over 95%
Temperature cycling	At -55℃ for 30 min,then at +25℃ for 10~15 min,then at +275℃ for 30 min,then at +25℃ for 10~15min, total 5 cycles.	ΔR≤±(1%R₀+0.05Ω)
Load life in humidity	Overload rated voltage or Max. working voltage(get the lower) for 1000 hours (1.5 hours on and half-hours off) at the 40±2℃ and 90~95% relative humidity.	ΔR≤±(5%R₀+0.05Ω)
Load life in heat	Overload rated voltage or Max. working voltage(get the lower)m for 1000 hours (1.5 hours on and half-hours off) at the 70±2℃.	ΔR≤±(5%R₀+0.05Ω)
Terminal strength	Pull:10N	ΔR≤±(2%R₀+0.1Ω)
Vibration	Frequency:10~55Hz,Swing:0.75mm,Test time:6Hours	ΔR≤±(2%R₀+0.1Ω)
Nonflammability	Respectively load AC voltage by5,10,16 times rated power for 5 min.	No visible flame