Specifications

pipe expandidng machine
1.run stably with little noise
2. run smoothly and reliably with low failure rate.

Hydraulic two-step pushing pipe expanding machine YKG-II

 

Performance

The equipment is a specialized device for petroleum,chemical industry,electric power,oil and gas pipeline and other fittings ;it was designed and manufactured by our company ;it synthesized many years of improvement and technical requirements in fittings industry. It mainly chooses seamless and welded pipes as raw material and makes use of hydraulic pushing-method equipment mating intermediate frequency heating system to realize the production procedure of hot expanding pipe diameter. The products adapt carbon and alloy steel pipes expanding from original small-diameter pipes to big-diameter pipes.the equipment possesses logical design, reliable working,convenient operation,automatically feeding system for relicving labor intensity;main unit _adapts hydraulic rotation easy to realize the rapid shifting between stepless speed governing speed –reverse with working process,and can easily adjust thrust.it can run stably with little noise,the circuit board of intermediate frequency power adapts advanced technology;starting circuit with constant power digital sweep frequency can run smoothly and reliably with low failure rate.

Major technology parameters

 

Paramete model	YKG-II-219	YKG-II-325	YKG-II-426	YKG-II-530
Max diameter expanding to	219	325	426	530
Inner diameter of hydro-cylinde(mm)	160	200	220	250
Thrust force of  hydro-cylinde(T)	84	130	160	206
Using thrust force(T)	67	104	128	165
Working adfvance speed(mm/min)	2500	1400	1600	1200
Return stroke(mm/min)	5000	3900	3400	3300

 

Paramete model	YKG-II-630	YKG-II-720	YKG-II-820	YKG-II-920	YKG-II-1020
Max diameter expanding to	630	720	820	920	1020
Inner diameter of hydro-cylinde(mm)	280	300	320	340	360
Thrust force of  hydro-cylinde(T)	258	296	337	380	420
Using thrust force(T)	206	232	270	320	360
Working adfvance speed(mm/min)	1100	1000	950	900	800
Return stroke(mm/min)	2800	2700	2200	2000	1700

 

 

 

Remarks:

       1,the thrust force of hydro-cylinder shall be calculated as two hydro-cylinder;design max pressure is 21Mpa;using pressure is 0-18Mpa.

2,the data is for reference only.

ducts can be customized according to requirement