Specifications

1. applying to high-voltage underground cable transformers, switches, switchgear
2. cable joints, T connetor
3. 35/600

 Cable joints

The RU T2T-35/600 600A 35kV T-II deadbreak connector is used to terminate high-voltage underground cable to transformers, switches, switchgear and other apparatus. It is fully shielded, submersible and meets the requirements of ANSI/IEEE Standard 386-"Separable Insulated Connector Systems".

The 600A loadbreak interface provides a means for obtain a live test,visible ground and visible break using a shotgun stick . It also provide a convenient loadbreak for an M.O,V.E arrester or grounding elbow.

There is an exclusive optional capacitive test point similar to test points on RU 200A elbow connectors, which allows use of Hot Line Voltage Indicators.

The deadbreak T-II connectors are designed for use on solid dielectric calbe with extruded semiconducting shielded and concentric neutral,with or without a jacket.

Electrical Characteristics:

Voltage Rating and Characteristics
Description	kv
Standard Voltage Class	35
Max Rating Phase to phase	40.5
Max Phase to ground	26
AC 50 Hz 1 minute Withstand	104
DC 15 minute Withstand	104
BIL and Full Wave Crest	200
15kv Partial Discharge	≤10PC
Current Ratings and Characteristics
Description	Amperes
Continuous	200A
Switching	10 operations at 200A, 14.4kv
Fault Closure	10kA
Short time	10kA rms symmetrical for 0.2s 3.5kA rms symmetrical for 3.0s
Electrical Characteristics are in accordance with or exceed GB/T 12706.4-2002, ANSI/IEE 386-1995, IEC 60502-4:1997