Name: Extruded Polystyrene insulation and decorative board for exterior wall
Brand: Cton
Availability: InStock

Product Details

XPS insulation and decorative board for exterior wall

Product Description

Exterior insulation and finishing system (EIFS)panel or board is a general class of non-load bearing building cladding systems that provides exterior walls with an insulated, water-resistant, finished surface in an integrated composite material system. CTON insulation decorative composite board,made up of three parts :surface coating,carrier base

board,insulation layer,with functions of insulation and decorative which is widely used for exterior wall.

Specification:

Test item				Performance index
Thermal insulation decorative board for exterior wall	Weathering ability		appearance	No chalking ,peeling ,hollowing ,or seepage
			Tensile bonding strength between the panel and insulating layer .Mpa.	≥0.10.the damaged part located in the insulating layer. (≥0.20 for XPS board)
	Wind load resistance value/kpa.			No less than the design value in the project
	Impact strength / J			10.0
	Water absorption .g/m2			Not than 500.(under water for 24h)
	Freeze-thaw resistance	appearance		No seepage crack ,chalking ,hollowing and peeling after circulation of 30 times.
		Tensile bonding strength between the panel and the insulating layer.Mpa.		0.10,the damaged part located in the insulating layer(≥0.20 for XPS board.)
	Thermal resistance			Conforms to design requirements
	Water tightness			No seepage in the panel protective layer
	Vapor permeability .g/m2.h			≥0.85.(no requirements for ventilation structure)
XPS insulation plate
	Apparent density.kg/m3			20--25
	Thermal coefficient			≤0.030
	Tensile bonding strength between the panel and the insulating layer .Mpa.			≥0.20
	Water absorption(v/v) %			≤ 2.0
	combustibility			No less than class B

Certifications

Technology

Cton has many automatic assembly lines such as the complete set of UV, spraying, drying and PU continuous board which enable to deliver product quickly responding to the client’s need.

Besides, we factory has the complete testing and inspection equipment, such as the inspection equipment G84-II reflectivity measuring instrument, QXD scraper fineness test, GKL-II drought and crack tester, viscosity meter, YQ-Z48B white tester, JTX-II abrasion instrument. The company controls every physical and chemical performance for the raw materials entering the factory and the production process strictly. Also the company conducts the strict quality test for the covering rate, fineness, initial aridity and crack resistance, viscosity, whiteness, washability of the painting. RS232 precision electronic balance can make sure that the product weight test deviation is accurate to 0.0001mm.

Production Flow

Installation