Specifications

newest cryolipolysis Freeze cryo slim // 2HD cryolipolysis lipo fat reduction
coolsculpture weight loss
frozen cryolipolysis

newest cryolipolysis Freeze cryo slim // 2HD cryolipolysis lipo fat reduction

         

 

Treatment settings

1.The treatment time at each body site is 30-60 minutes.

2.Eliminate body fat part by part.

3.Take another freezing process to treat the same location for 2-3 months, which can reduce the excess fat thickness.

4.Cryolipolysis cool-sculpturing treatment is designed for those physically healthy people who have local fat deposits, but not suitable for the one with overall obesity.

 

 

Treatment process

1.Test the heart rate of the patient before the treatment

2.Check the fat thickness

3.Clean the treatment area, remove the hair around.

4.Mark the size of the treatment area

5.Apply the antifreeze fluid on the treatment area

6. Paste the antifreeze film on the treatment area

7.When receiving treatment, the patient should be sitting, making a 90°angle between his/her upper part of the body and thigh.

8.Use the freezing device to suck the skin of treatment area gently, and then set the intensity of the vacuum suction.

9.Use appropriate and constant suction intensity, the suction intensity is adjustable according to the patient's individual vulnerability.

10.After 25-30 minutes of treatment, press the pause button to suspend the suction, check and add antifreeze fluid.

11.Repeat Step 10 until the completion of the treatment

 

 

Model Name	Cryopolysis vacuum loose fatty machine King  FC-01
Application Scope	cool-sculpturing beauty equipment cryolipolysis for small area bulges; effect fast; no pain; no-invasive. cool-sculpturing beauty equipment
Surprise effect with cryolipolysis	1.With a single treatment subjects had a 20 % reduction after two months 2.The lipolytic effect of treatment takes place within about two to four months. 3.It is primarily applicable for limited discrete fat bulges.
System Parameter	Montor Display	System Parameter
	Treatment Heads	2pc
	Power	< 650W
	Simmer output temperature	-10 - 0 C
	Output power	0-100KPa
Principle of cooling-sculpture  cryolipolysis	coldness can selectively damage subcutaneous fat while the skin remains intact. Based on this premise, namely fat cells are more easily damaged by cooling than skin cells, cryolipolysis was developed appling cooling to tissue via thermal conduction in a controlled fashion, selecting temperature level(1degree-6 degree) and exposure to avoid skin damage or frostbite resulting only to damage to the underlying fat cells.