Product Details

Detail information about Carbon brush EGOR:

Technical parameter

GRADE	RESISTIVITY	FLEXURAL	HARDNESS	DENSITY	CONTACT	FRICTION	CURRENT	MAX
		STRENGTH			DROP	COEF.	DENSITY	SURFACE
	u OHM / m	Mpa	Scleroscope	g/cm^3			A/cm sqr	SPEED
EGO	12	21	36	1.55	0.95	0.11	10	30

Product Description

1. About material :

Aobo Carbon provide carbon brushes in all kinds of applications for OEM customers and end users. Our customers have proven the good quality can keep in long -term use. We are sure to offer you the suitable material.

Graphite material ---- for slip ring of high-speed turbine.

Metal graphite material --- for high load and low voltage motors with less commutation task.

Resin bonded graphite material--- for small and middle sized DC(Direct Current) motors and generator plant.

Electro graphite material ----has excellent commutating performance and self-lubricated functions, have been widely used in all AC(Alternating Current ) and DC(Direct Current) motors

2. About material original :

---- Original , From Original products manufacturer

----- Abroad one , From Abroad , eg, Germany or American , same as original carbon brush material

----- China similar one, From China local, similar to Original material

3. About difference between China Similar and Abroad one :

----- Density , resistivity , current density and max speed maybe similar or same

----- Lifetime not same . eg, Abroad one can use 1 year, China similar can be up to 6-8 monthes.

Detailed Images

FAQ

Technical hitches	Causation	Repair
Brush spark	1.Commutator deformed	1.Loosen the fastening screws to re-adjust
	2. Copper barbed or sharp edges	2. Re-chamfer
	3. Brush pressure is too small	3. Adjust or replace the spring pressure
Brush overheating	1. Brush too much pressure	1. Adjust or replace the spring pressure
Brush overheating	2. Single Brush pressure imbalance	2. Replacing different carbon brushes
Wear fast	1. Commutator was dirty	1. Clean commutator
	2. Copper barbed or sharp edges obvious	2. Re-chamfer
	3. Load is too small to form an oxide film	3. Improve load or minus number of brushes
	4.Work environment is too dry or too wet	4.Improve the working environment or replacement brush card

Buying Guides

1. when order brushes product, end users should specify the order drawing number, type and size the required quantity and delivery time requirements

2. Special specifications and structure, please provide drawings or samples

3. Our company has kept the map, when ordering, please indicate the figure number

4. We list the commonly used various sizes and models of carbon brushes , if there are special requirements, please note so that specify them in contract

5. How to select brushes

-according to the motor feature to choose grade of carbon brush

-according to box size of brush holder to confirm size of carbon brush

-according to brush holder structural to know type of carbon brush

Packaging

Firstly --- Lined with bubble film

Then --- Outer use five layers of corrugated board

Finally --- Product is heavy or customer demand, will use wooden case