Specifications

Jaw crusher, stone crusher machine;
1.High performance stone jaw crusher;
2.ISO9001:2008 certified & SGS;
3.Low energy cost.

ISO9001:2008 Stone Jaw Crusher For Sale

 

We have three kinds of jaw crushers:course jaw crusher,fine jaw crusher,Deep Cavity Fine Jaw crusher.

DSMAC Stone Jaw Crusher Aplication:

Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.

 

DSMAC Stone Jaw Crusher Working Principle:

The Crushing form of this series Jaw Crusher is driven-squeezing style. Its working principle is: Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.

DSMAC Stone Jaw Crusher Technical Specifications:

Type	Maximum Feed (mm)	Adjusting Range(mm)	Production Capacity(t/h)	Eccentric shaft Rotary Speed (r/min)	Motor Power (kw)	Dimensions (Length*Wide*Height) (mm)	Weight (excluding motor) (t)
PE150*250	125	10-40	1-5	285	5.5	8758*758*850	0.81
PE250*400	210	20-80	5-20	310	15	1108*1142*1392	2.8
PE400*600	340	40-100	16-65	275	30	1700*1732*1653	6.5
PE500*750	425	50-100	45-100	275	55	2050*1860*2145	10.2
PE600*900	500	65-160	50-120	250	55-75	2792*2168*2250	15.5
PE750*1060	630	80-140	52-180	250	110	2660*2430*2800	28
PE900*1060	685	90-150	100-250	250	110	2970*2556*2800	31
PE900*1200	750	95-165	140-260	200	132	3380*2870*3330	50
PE1000*1200	850	150-265	315-340	200	132	3480*2876*3330	50.6
PE1200*1500	1020	150-300	400-800	180	200	4200*3300*3500	78.6
PE1500*1800	1200	220-350	500-980	180	355	5100*3740*4937	121

 

Fine Jaw Crusher Technical Specifications

Type	Maximum Feed (mm)	Adjusting Range(mm)	Production Capacity(t/h)	Eccentric shaft Rotary Speed (r/min)	Motor Power (kw)	Dimensions (Length*Wide*Height) (mm)	Weight (excluding motor) (t)
PEX750*150	120	18-48	5-16	320	15	1220*1480*1180	3.5
PEX750*250	210	25-60	8-22	300	22	1400*1617*1412	4.9
PEX1000*250	210	25-60	10-32	330	37	1580*1992*1380	6.6
PEX1200*250	210	25-60	13-38	330	37	1530*2192*1380	7.7
PEX1300*300	250	20-90	16-100	300	75	1880*2320*1725	11.08