Product Details

Specifications

lymphatic massager
infrared heat wrap
heat sweat wrap
far infrared blanket and sauna thermal blanket for weight loss
3 heat

lymphatic massager
infrared heat wrap
heat sweat wrap

Product Detail :

The 3 zone sauna blanket is the most popular one of our products .please refer to attached for all detail photo .

Othes photo :

Certificate :

Instruction for use
Place the Infrared Sauna Wrap on a flat surface, such as the bed or floor.
Put the control box on a flat surface, such as a table,Connect the 3 blanket connection to control box's Five-core socket.
Then connect the power cord to the main power socket.
Turn the main power switch on at the back of the control box. There are a sound and screen are flash. The device has not started working yet.
Press the ''POWER'' key to start setting the temperature and the timer.
Press ''START'' key. The right bottom of red dots will flash and temperature are change, showing that heating has started.
Press ''TEMPERATURE'' to set the working temperature. the temperature will increase or decrease by 1° Centigrade for each time is pressed. Recommend temperature is 60degree
Then press ''SELECT'' key to choose the zone .There are red dots on the bottom of screen .
Press ''START'' key. The right bottom of screen will flash and temperature are change, showing that heating has started.
When the heating timer counts down to ‘0’, The beep will sound 5second . showing the heating has finished.
After using it, please cut off the power button at the before of the control box,Turn the main power switch off at the back of the control box and take off power cord . finally,pull the plug out from the power source. Attention :Please do not take off the 3 blanket connection before close the power .
If you need to stop the session at any time, just press the ‘Start’ key.
Wipe the sweat on the surface of the thermal blanket with a wet towel ,and dry it by laying it on a flat bed or table for 30min .
Fold the blanket and store it in a dry place.
If people want to use it more than one time in a day, wipe surface of the thermal blanket with a wet towel after using it , then please wait 30 minutes ,preferably 1 hour.

Caution & Safety
Don’t Don't put the control box on the body of blanket
Don't cut the power when the product is working.
Don't take off 5 core connection lines when the product is power-on.otherwise the high current will make control box broken .
Don’t wear metal and silver accessories(Include the cell phone.)
Don't put the blanket on the leather beauty bed, put a Cotton Towel between blanket and bed.Because the high temperature will make two leather glued together .
Don't use Corrosive cleaning product clean the blanket
Don't Don't let the blanket working alone without people.
Don't Fold the blankets when it is hot ! After the blankets are cools off absolutely ,then fold the blankets
Avoid the product expose in the sun,and Stored in the shade ventilated place.
Please keep the inside of blanket clean and dry, Keep from moisture!
Do unplug the main power socket immediately,after using it.Then take off the 3 wire connection
Do not allow children to use this blanket