LED infrared sensor cabinet light

Features:

1. Automatic Induction Lock LED lights use of human infrared sensor technology and light automatic detection technology.

2. When approached hand door, installation of automatic door lit at the top of the LED lights.

3 people, the light is always on, people left, lights automatically turn off.

4. Make your convenience, peace of mind into your home.

5. do not have to grope in the dark in front of you.

6. When you go out, you do not lock the door in the dark.

 Specifications:

1. sensing modes: human infrared sensor

2. Sensor control: a photosensitive sensor (night work, day standby)

3. Sensor sensitivity angle: 60 degrees

The sensitive sensor distance: 3 m

5. Power: 1.5V, 1PCS "AA" Lr06 or rechargeable batteries (not included products, including)

6.LED: high brightness white LED

7.LED number of stars: 4

8.LED life: 100,000 hours

9. delay time: people, the lamp has been lit, people left, the lights will automatically turn off 5 seconds delay

10. Standby current: <0.1mA

11. Battery life: high-performance Lr06 battery can work for 6 months or more (3-5 times / day)

12. Operating temperature: -5'- 38'C

13. The Working Humidity: 5% -93%

14. Product Size: L * W * H: 81 * 46 * 30mm

15. Weight: 75g

Installation method:

1. Use double-sided adhesive fixed (factory gift)

2. Use M3.0X20 mm screw base (screw bring your own)

Troubleshooting:

1. When the power is turned on, the light does not shine.

  Solution: A, check the battery polarity installation

                     B, when the ambient light is too bright, when the lamp is in Standby.

                     C, the battery is no electricity, replace the battery.

2. When the power is turned on, LED lights flash.

  Solution: A, the host needs one to two minutes to stabilize internal circuits.

                 B, the battery may be running low, replace the battery.

Precautions:

1. Do not place the product toward the glass door or temperature extreme changes,

2. Because this method of using infrared sensors product, so it needs a more stable environment.

3. Please put away the lights and television monitors and other places.

4. Please pay attention to the working conditions of temperature and humidity, otherwise the battery life will be affected.

5. Use good quality LR06 (AA) 5 batteries or rechargeable batteries.

6. After the light is off, the delay time of 6-8 seconds, then back to work.

Do not direct the light beam 7.LED human eye, especially children.

8. When the product, do not install the easy reach of children to avoid accidents to children

 Packing: color box or white box.

 Shipping: by express, by air or by sea.

 We are 24 hours on line, welcome to contact us.