ucs512 dmx led shooting star tube   

1.3D tubes can be suspended from the ceiling horizontally and vertically in club, stage, events and so on.

2.High-brightness SMD RGB 5050 leds are used on this tube

3.Double side lighting effects can be seen from 360degree

4.Clear housing make lighting clear and vivid

5.2D pixel mapping can be transformed to be 3D with the help of software programming.

6.The communication between tubes are synchronized perfectly under support of Artnet Controller

7.Standard DMX512 control protocol(Max 44frames/second)

8.Environment friendly, no noise, no flicker

dmx vertical tube is also called dmx meteor tube or dmx snowfall tube
16 segment 3D rgb tube, 360 degree tube, dmx rgb led tube, fantastic rgb tube

Silver housing led tube, looks like a mirror, it's a nice artwork even power off, very beautiful

It can be installed indoor or outdoor, music control, mostly used in DJ bar, shopping mall, Christmas ect

Parameters

Dimension

Wire connection:
1) Signal wire: DC+,GND,DAT-a, DAT-b
2) DC+ and GND connect to power supplier;DAT-a and DAT-b connect to controller
3) Relative Controller: can connect to DMX system after addressed.
4) Support online control

5) Make sure the connection is correct according to the diagram
6) Pay attention to the parameters limit of voltage. DO NOT run over the peak value.

Picture details:

Application:  DJ, night club, television studio, theater, stage, concert, event, party and so on.

Connection:

Packing Info:

50 pieces of meteor tube per carton
Carton Size:
0.5m: 57*41*23cm,      14KG/CTN

1m: 117*41*23cm,        28KG/CTN

1.5m: 167**41*23cm,   42KG/CTN, 2 CTNS paked with 1 wooden case (wooden case Dimension: 169*50*50cm)

2m: 217*41*23cm,        56KG/CTN,  2 CTNS paked with 1 wooden case (wooden case Dimension: 219*50*50cm)