Specifications

Addressable 60 Pixels Ws2812b Led rigid bar
DC5V14.4W/M
WS2811 built into 5050
2 years warranty

 

artnet addressable pixel ws2811 rgb led rigid bar outdoor use IP68 

 

DETAILS:

1.60LEDs/M, 60IC/M, addressable ws2812b(ws2811 ic built inside) led rigid bar.

2.3 chips SMD5050 RGB adapt as light source

3.IP65, IP66, IP67, IP68 Waterproof

4. WS2811 IC, 60pixels per meter (1IC control 1LEDs, ws2811 ic built inside of the the smd5050 rgb led).

5.Aluminum case waterproof 

6.Compact size, It has a super slim shape with width only 20mm

7.Aboundant color modes, up to thousands of color change modes can be put in the programs

8.Work with LED control system could get Jumping, fading, flashing, dimming mode

9.Users can cut every 1 LEDs, Continuous light connection, It can run 5 meters continuously

10.60pixels ws28111c black pcb aluminum housing led light bar ws2812b

 

Datasheet:

Products Name	WS2812b Led pixel bar
Model NO.	SJ-A10060-2811
Power Consumption	14.4W/Meter
Work Voltage	DC5V
IC model	WS2811
LED Quantity	60pcs SMD5050RGB ws2812b
Color	Full color(ICRGB)
Dimension	1000*17*10mm
Waterproof Grade	IP65,IP66,IP67, IP68
Work Temperature	-40-60°C
Life-span	50,000H
Certificate	CE&RoHS
Warranty	2 years

 

Wire connection:
1) Signal wire: DC+,GND,DAT,CLK
2) DC+ and GND connect to power supplier;DAT and CLK connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX system
4) Support online control

5) Make sure the connection is correct according to the diagram
6) Pay attention to the parameters limit of voltage. DO NOT run over the peak value.

7) 60pixels ws28111c black pcb aluminum housing led light bar ws2812b   
   

Control:
1) Each pixel can be controlled individually
2) Can show any color
3) Can be used as led display screen to show image and video

 

Picture details:

 

aluminum case waterproof IP65, IP66,IP67, 60leds/m individual control

 

 

 

Install and mounting: 2 male and female waterproof connector on each end side,

use a T-connector to connect bars, and the metal holder for mounting onto the wall.

 

 

 

Control and effect:  DMX controller & decoder & SD controller & arduino controller,

Each led change color individually and pixel addressable full color.

T-1000S.

 

Application: Architectural decorative lighting, canopy and bridge edge lighting.