Product Details

Introduction and application

Medium Frequency Induction Furnace is the device converting three phase power current into single-phase intermediate frequency current and enabling metal to produce eddy current loss through the electromagnetic field induction to achieve heating and melting. Mainly be used in the material of ferrous and non-ferrous metal casting, melting and heating treatment industry, such as iron, steel, brass, cooper ,zinc ,tin and so on. As well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.

Performance Characteristics:

1.Zero-voltage scanning soft , available for start or stop at any time under any state without impact on power supply;

2.Speedy melting, low production cost , low pollution, conforming to environmental protection requirement;

3.Melting directly from low temperature, available for fully emptying of solution , easy change of category of melting material;

4.Flexibly adjustable power, easy and continuous smooth adjustment, easily controllable temperature, low oxidization loss, uniform metal content;

5.Furnace shell with cast aluminum ally or steel shell construction, small footprint, easy overturn body, available for selection of electric, manual, hydraulic or other overturn mode as needed;

Equipment Type & Technical Parameters:

Equipment Type	Furnace Capaicty	Power input(Three-phase Four- wire 50/60Hz)			Power Output				Melting Time (Minutes)	Power consumption per ton of material (KW)
Equipment Type	Furnace Capaicty	Rating power (KW)	Input Voltage (V)	Input Current (A)	DC Current (A)	DC Voltage (V)	IF Voltage (V)	IF frequency (KHZ)	Melting Time (Minutes)	Steel (KW)	Iron (KW)	Copper (KW)	Brass (KW)	Aluminum (KW)
KGPS--0.05T	50KG	50	380	80	100	500	750	1-2.5	20-60	850	800	450	420	470
KGPS--0.1T	100KG	100	380	160	200	500	750	1-2.5	20-60	800	750	450	400	460
KGPS--0.2T	200KG	160	380	256	320	500	750	1-2.5	30-70	750	700	440	390	450
KGPS--0.25T	250KG	160	380	256	320	500	750	1-2.5	30-70	750	700	440	380	440
KGPS--0.3T	300KG	200	380	320	400	500	750	1-2.5	30-70	700	650	430	380	430
KGPS--0.5T	500KG	250	380	400	500	500	750	1-2.5	30-70	650	600	430	370	420
KGPS--0.75T	750KG	400	380	640	800	500	750	1-2.5	40-70	630	580	400	350	410
KGPS--1T	1Ton	600	380	960	1200	500	750	0.7-1	40-70	600	560	390	340	400
KGPS--1.5T	1.5Ton	1000	380	1600	2000	500	750	0.7-1	50-70	580	530	380	330	380
KGPS--1.5T	1.5Ton	1000	660	912	1140	880	1300	0.7-1	50-70	580	530	380	330	380
KGPS--2T	2Ton	1250	380	2000	2500	500	750	0.5-1	50-70	560	520	370	320	360
KGPS--2T	2Ton	1250	660	1140	1430	880	1300	0.5-1	50-70	560	520	370	320	360
KGPS--3T	3Ton	1500	380	2400	3000	500	750	0.5-1	50-80	530	510	350	310	350
KGPS--3T	3Ton	1500	660	1370	1710	880	1300	0.5-1	50-80	530	510	350	310	350
KGPS--5T	5Ton	2500	380	4000	3200	780	1170	0.3-1	60-90	510	490	340	290	330
KGPS--5T	5Ton	2500	660	2272	2840	880	1300	0.3-1	60-90	510	490	340	290	330
KGPS--10T	10Ton	5000	660	4560	5700	880	1300	0.3-1	70-100	500	450	320	260	320
Furnace temperature:1.Steel 1650°C 2.Iron 1450°C 3.Copper 1150 °C 4.Brass 1000 °C 5. Aluminum 700 °C 6. Zinc 400 °C
Remark:
*1.Melting time and power consumption/ton is important to equipment power, raw material shape and weight, operator's skill level and other elements;
*2.Power paramenters shall be subject to steel melting; lower power is required by melting of copper, aluminum, zinc or other material with low melting point; please consult Rongdongsheng Technical Department for specific data
*3.Configuration :an intermediate frequency power supply,a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc
* 4.The above data is of standard model. We also provide customized non-standard products with different power or melting speed.