menred digital temperature controller thermostat E62
E62... room thermostat for underfloor heating
Programming heating thermostat with LCD screen,which has manual mode and clock-controlled programme mode.The thermostat is recommended for the control of electric heating device or on/off valve actuator in hydronic underfloor heating.
This kind thermostat has 24-event in one day and weekly programming.
Application
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...
Parameter:
Voltage:220V/230V
Power comsuption:2W
Setting range:10~55celsius(can adjust to 5-90celsius)
External limitation:5...60celsius(factor seting 35celsius)
Switch differential:0.5-10celsius adjustable
factory setting±1 celsius
Ambient temperature:-5~50 celsius
Protective houseing:IP20
Housing material: anti-flammable PC
Sensor Failure
E0:Built-in sensor short-circuited or disconnected.
E1:Exernal sensor short-circuited or desconnected.
When shows E0/E1 error,thermostat must be checked till the error is eliminated.
Selection Table:
| Model | Current | Application |
| E62.113 | 3A | Built-in&floor sensor,floor limit sensor |
| E62.123 | 3A | Built-in&floor sensor,floor limit sensor,a potential-free output |
| E62.116 | 16A | Built-in&floor sensor,floor limit sensor,Cable heating |