220v ac 60hz motorized thread 3 way full port ball valve

Product introduction

POV thread 3 way full port ball valve with electric mini according to the structure can be divided into L-type

and T-type, and T-type has four kinds of directions, L-type has one type direction, can be come true: Reversing,

shunt, combined,mixed flow effect. Match with electric actuator and pneumatic actuator can realize automatic control.

3 way ball valve seat material has: PTFE, PPL, hard steel, suitable for temperature range of 180-380 degrees. Please

kindly note the 3 way flow directions when order.

Standard technical parameters

Body

Nominal size: DN15-DN50mm

Body material: 304, 316,316L

Connection type: Thread

Pressure class: PN16-PN6.3MPa

Structure type: Floating ball core 3 way L-type, 3 way T-type

Valve components

Seat material: PTFE: -30~180C

              PPL: -30~250 C

Hard seal: -30~450 C

Hard alloy: Surface spray welding, tungsten nitride treatment

Core material: 304, 316, 316L; hard seal core surface spray welding, tungsten nitride.

Stem material: 304

Applicable medium: Water, liquids, oil, gas, powder, steam, acid-base medium, etc

Performance

Fire protection design

ISO5211 standard direct mounting actuator

Antistatic device between the core and the valve body

Stem explosion-proof design

Double butterfly shaped spring automatic compression packing design

Allow pressure differential: Less than nominal pressure 1.6MPa

Leakage: Zero leakage

Return difference: ±2.5%

Design and manufacturing standards

Design standard: GB/T12238-2008

Structure length: GB/T12221-2005

Connection standard: JB/T 79.1-1994

Pressure testing: GB/T13927-2008

Electric actuator

On-off type: feedback signal: Passive contact signal/4-20mA/ resistance signals.

Regulation type: Input signal 4-20mA/0-10V/1-5V;

Feedback signal: 4-20mA/0-10V/1-5V

Voltage: AC220V380V110V24V,DC12V24V etc;Special voltage can be customized.

Explosion-proof class: Can be choose explosion-proof type EX d IIBT4

Electric ball valve outine size drawing: 

1) Please introduce the electric type working principle?

        ----> For electric actuatoed ball valve mainly has two kinds, one is switch on-off type; 

               When get through 1 and 2, the valve open, at the same time feedback a passive contact signal;

                     When get through 1 and 2, the valve closed.  

Another is regulation type I/O: 4-20mA type;

This type can be used as a regualation valve and through the inner control mould

Regulation control the valve open and closed degrees at the same time means can

Be regulation control the flow medium speed, etc. Just input 4-20mA signals from the

transmiter or PLC control, etc and the mould can be recieved these signals and feedback

the related signals at the same time;

2) Do you have electric ball valve 3 way dn100 thread type? 

----> For 3 way internal thread ball valve the biggest size is 50mm and above 50mm

please refer to 3 way flanged ball valve or sanitary clamp ball valve.

If you have any interest in our product, please contact with me and provide some parameters

such as diameter,material, applicable temperature and medium,type of electric actuators

And we will contact with you at the first time!

Pov valves(Shanghai) CO., Ltd.

Contact person: Arina