Common precision flow control infusion set with burette
Features:
1. 100ml or 150ml graduateed burette with shut-off value
2. With air vent
3. Flexible and clear drip chamber
4. With or withhout buoy, with or without filter
5. With two flow regulators, one up the burette
5. Luer slip or luer lack adapter
6. Latex or latex free "Y" injection
7. For gravity use 60 drops =1 +(-) 0.1ml
8. For children use
Products specification:
Item name | Common precision flow control infusion set with burette |
Material | Medical grade PVC/PP/PE/ABS, |
Color | Transparent |
Type | 100ML and 150ML burette |
Style | With or without buoy,with or with fluid filter |
Advantage | Suitable to hard containers ,Sterile, non-toxic, pyrogen free |
Certificate | CE, ISO |
Sterilization | EO gas |
Loading port | Shanghai or Qingdao |
Terms of payment | 30% deposit before production and 70% balance payment before deliver or L/C at sight |
Delivery time | Within 30days after receipt of deposit or LC at sight |
Material for main components
Protective cap | PP or PE | Drip chamber | PVC |
Closure-piercing device | ABS | Tubing | PVC |
Air vent | PVC | Flow regulators | PP |
Roller clamp | ABS+PE | Needle free site | PC+Silicon gasket |
Burette up-cap | PP | Burette bottom-cap | PP |
Burette Body | PE | Rotating connector | PC+PE |
Directions for Use
- Close the roller clamp.
- Punch the lancet into the container.
- Open the roller clamp and expel the air bubbles.
- Close the roller clamp.
- Guide the needle into the vein.
- Adjust the flowing rate.
- Infusion set with air-inlet device in use with the rigid container.
Caution
- Read ‘direction of use’ carefully before use.
- Do not touch the needle
- This set is only for single use.
- Do not store under direct sunlight or extreme temperatures.
- Keep dry
- Do not use if package is damaged or open
- Do not use after expiry date
- Discard after use.
- Never use if any part of the set is disconnected, or if protective cap is detached or loose
Transportation and Storage
-This product is strictly prohibited during transport wrestling touch, rain, stress.
- The product should be stored in less than 80% relative humidity, temperature -10 °C ~ 40 °C, non-corrosive gases and well- ventilated room.
-Laying layers not more than seven layers.
Pictures of products
professionnal factory
Quality management system certificate: