Power Plant Pleated Water Filter
USD $30 - $35 /Piece
Min.Order:1 Piece
Shanghai Pullner Filtration Technology CO.,LTD
General Description
PHFZ Series Pleated Filter Cartridge can be back washed, all welded using hot-melt, no secondary pollution, no media loss, is designed for condensate polishing of power plant. It can be divided into PHFZ-Ⅰ(7 parts), PHFZ-Ⅱ(4+3) and PHFZ-Ⅲ (3 + 1) three types. The PHFZ-Ⅱ (4 + 3) is welded of 40" and 30", is the only one filter with 69mm diameter and integral outer support in domestic.
Features and Benefits:
Complete polypropylene structure and extensive application of chemical;
Using the threaded connection, easy installation, high dirt holding capacity;
Simple system, no acid consumption and pollution of regeneration acid and alkali;
Different precision can be used as startup and operation filter element of condensate polishing;
Integral support, with big filter area, long life, high strength, dimensional stability, low risk of leakage, etc.
Application:
RO pre-filtration, desalination pretreatment;
Power plant condensation water filtration;
Desalination, iron of petrochemical water treatment
Performance Specifications
Parts Material | Filter Media | Polypropylene |
Center Core | Reinforced Polypropylene | |
Dimensions(nominal) | Outside Diameter | 65mm, 69mm, 70mm |
Length | 70" | |
Connection Thread | 1 1/2"-12(Customized as customers’ request) | |
Bottom Thread | M6, M8, M10 |
Filter Performance
Micron | 1μm, 5μm(operation filter), 10μm(startup filter) |
Filter area | 6.5m² |
Maximum Operating Temperature | 85℃ |
Maximum Operating Differential Pressure | 2.8bar, 65℃ |
Design Flow Rate | 3.9m³/h~4.5m³h |